Super Street Network

 |   |  2006 Acura RSX Type S - Freddy, Set, Go!
Subscribe to the Free
Newsletter

2006 Acura RSX Type S - Freddy, Set, Go!

How Far Are You Willing to Go to Get Your Car on the Cover?

Jan 4, 2007
Sstp_0701_z+acura_rsx_type_s+exterior_view_rear_end Photo 1/1   |   2006 Acura RSX Type S - Freddy, Set, Go!

A strict rule around our office states: if a car's been shot for any competing mag-even if it's a magazine under the Primedia umbrella-it'll never make it onto our pages. We do, however, make some exceptions, but if and only if the car has been completely transformed into something totally different than its original form. A lot of people try to pawn off a new set of wheels as a drastic change, but the way we see it, you better be investing just as much money (or more) during the makeover process. In its former state, Fred Chang's RSX was what you could call a "magazine whore." Slanged out to just about every damn tuner book on the face of the earth, the gold brilliance of his RSX was unrivaled-even track tested by Road and Track-proving that a show car with a near complete catalog of high quality HKS parts could perform up to its name.

From the day he purchased it, Fred knew he wanted it to be in a magazine. He says, "I had always seen other guys build their cars and get them into mags and I'd always say to myself, 'Man, if I had that car I'd do it this way and for sure it'd look hot.' Sure enough, I got my RSX." After trying his luck racing at a few track events, he realized that his once-daily driver (hard to believe it was used to drive nearly 100 miles a day!) had to become more than just an internet super star. And seeing that a Honda Fit had recently become a part of his daily routine, the RSX could finally be used as a full-time racecar. Fred decided to redo his car, not just so he could become a better driver, but also to improve his chances of making it into another magazine. Right away, everything had to be upgraded: from the body kit to the interior and ultimately the color.

The chassis had already been sprayed once inside and out in Top Secret Gold by MOBworks, so he took it back to Miguel Ortiz to have him eliminate any remnants of its golden past by repainting it Absolutely Red, a color normally reserved for a few of Toyota's lineup. The original Mugen front bumper had been damaged heavily after running over debris on the freeway, so this allowed him to upgrade to Mugen's N1 body kit. But in order for the kit to fit properly, Fred had to upgrade the chassis to '06 spec, which involved the entire front end and taillights as well as incorporating the HID headlights from the JDM DC5 Integra Type R.

As soon as the exterior was color coated, it was time to work on the interior. Since the car was originally white from the dealer, it came with a light beige interior, a total mismatch to the new paint. Fred got in touch with his connections at Honda and ordered every piece, including the dash, proper headliner and every last plastic screw, to convert from beige to full black. But before the interior was installed, MOBworks sprayed down every square inch with the new red, then Fred added the EM Racing cross bars, an L Tuned C-pillar bar and relocated a Braille battery to the trunk. As the dashboard was laid in, he installed a Mugen steering boss and Sparco quick release along with a Personal 360 steering wheel, then picked up a new shift boot, gauge cluster, coin pocket and door sills out of the JDM ITR to make subtle enhancements. A pair of Bride Zeta III bucket seats was bolted in using Bride's Super Low brackets along with Takata harnesses for safety. With the makeover near completion, he also changed out the previous black-faced Volk LE-37Ks for a super baller set of 18x8.5 Advan RG IIs and hooked up a set of Parada Spec 2 tires from Yokohama in preparation for the RSX's participation at upcoming track events. He tuned the suspension by slipping on HKS' HiperMax II coilovers, Mugen strut bars and a rear lower arm bar from Carbing, then beefed up the brakes by installing larger Project rotors and calipers.

Version 1.0 of Fred's RSX wasn't slow by any means. It was used by HKS USA as a test bed for many of its turbo components, specifically for the K20 engine platform. For this version, HKS' tuning wizard, Jon Kuroyama fabricated a kit using one of their 2835 ball-bearing turbos and tuned it on their dyno for a total of 400+whp with the F-Con V Pro. Other HKS goods used are the GT Type S intercooler, a Reloaded Super Mega Flow intake, prototype Hi-Power exhaust and 680cc injectors to supply more fuel to the mix. Fred also made adjustments to the factory transmission by swapping out the final drive for one from the JDM ITR as well as a limited-slip differential, also from the Type R. Not one for tuning alone, he added some style by changing the black valve cover to a red ITR valve cover, an ARC spark plug cover and a carbon fiber intake manifold cover from Vision. The current plan is to have the RSX ready for the Time Attack finals, where it will make its racing debut; it'll be exciting to see just how fast and far it can go.

Fred doesn't want you to call him a "celebrity car builder"-just a regular guy will do. But after helping to spawn the online phenomenon called JTuned.com (not to mention building cars like this, and project cars for corporate digs like Scion) it seems as though Fred has no choice but to accept his fate. At only 23 years of age, Fred's worked side-by-side with America's favorite drifters as part of Slipstream, manages his own media company, Xerotalent and is constantly hustling to find the next big deal. "I don't like to consider myself as a car builder because I'm a far cry from a fabricator or someone who can really wrench their way around cars," he says. "I try to do as much as I can with the knowledge I've picked up. I've always been intrigued by cars and have worked on them all my life, and now it's turned into this out-of-control money pit that I can't seem to get out of. I think of my car as a drug, a wife and a headache-in that order." Fred, we know exactly what you mean.

Fast Facts'06 Acura RSX Type SOwner "Team" Fred Chang

Hometown Long Beach, CA

Daily Grind Adult video store janitor; secretly wants to own JTuned/Xerotalent/MediumGiant

Power 387 whp with 297 lb-ft at 14.7psi

Under The Hood 2.0l DOHC iVTEC K20; HKS 2835 turbo kit, exhaust manifold, GT Type S intercooler, Earth Circle System, Super Mega Flow Reloaded, prototype 80mm Hi-Power turbo exhaust, D1 limited oil cap, D1 limited radiator cap, Super Fire Racing spark plugs, custom SPL fuel return line, custom fuel regulator, 680cc injectors, custom tuned by Jon Kuroyama; Exedy clutch; JDM DC5R valve cover, final drive and limited-slip differential; AEM fuel rail; C&R radiator; SPAL fan; ARC spark plug cover; Vision carbon fiber intake manifold cover; steel braided oil lines and TMR fittings; Braille race battery (relocated)

Brains HKS F-Con V Pro version 3.2, gold EVC valve controller, turbo timer

Stiff Stuff HKS HiperMax II coilovers; Mugen front and rear strut tower brace; EM Racing cross bars; L Tuned C-pillar bar; Carbing rear lower arm bar

Stoppers Project limited edition gunmetal brakes and e-coated rotors and lines

Rollers 18x8.5 Advan RG II with +31 offset; 215/40R18 Yokohama Parada Spec 2 tires; Racing Nut R40 pre-lock lug nuts

Outside Mugen N1 front aero bumper, front aero canards, front racing under panel, side step kit, rear valance, rear aero adjustable wing, front/rear tow hook, rear limited carbon fiber license plate filler and gas cap; Vision Type DC mirrors; carbon fiber hood; JDM DC5R window visors, HID headlights, rear taillights, badges and side markers; body work and paint by MOBworks

Inside Personal 360 steering wheel; FET Nardi adapter; Mugen steering boss and pedals; Sparco quick release; HKS D1 limited shift knob; JDM DC5R shift boot, cluster, coin pocket and door sills; Takata MPH-340 harnesses; Bride Zeta III Sport seats and Super Low brackets/rails

ICE Pioneer AVIC-N3 head unit

Props Of course I'd like to thank God for giving me the opportunity to meet so many awesome people in this industry. I'm so fortunate to be gracing the cover of the illest tuner book out there! Mom, Dad and Cathy you guys have been nothing but hell for me, but hey, you're family so that's enough for me; Jason, Brandon, Lucian, Scott, Steve, Mike at JTuned; BD and Jeremy at Lakai/Podium Dist; Randy Bruce at VonZipper; Aldrich Gatpayat at Acura; Sheng Chao and the JHPUSA Crew; Andy, Brandon, Garret, Ryan, Howard, Matt, Jon, Mike, Willie, Cathy, Amy at HKS USA; Kristina, Andrew, Mike at Yokohama Tire; Eddie, Steve, Brian and Philip at Mackin Industries; Matt and Jaed at Pioneer Electronics; Jarod at Meguiar's; Greg Nakano at AEM; Brett Kelly at Takata; Jesse and Abe at Euphoric Designs; Brad Himes at Nukabe/Cusco; Russ at Exedy; Adam Nelson at South Coast Performance; Ed and Mike at Evasive; Earl at Star Shield Armor; RJ at I'm Mr. Devera; Edward Loh for telling me to stop; Jim and Ryan at Slipstream for always giving me the time off to do this; Mark, Hugh and Daryl at SP Engineering; Lil' Jon at Auto Network; Miguel Ortiz and boys at MOBworks; JWo, Dadsy, Carter, Ricky and the rest of the jotos at Primedia. Then of course there are my friends who have always kept me grounded from day one: Daniel, Mike and Ed I owe it to you fun boys; my Fullerton girls: Connie, Al, Sarah, Leslie and Angela; to my import model girlfriends, Liz and Sunisa, you guys are the ones that really make me look cool! And everyone else that I forgot to thank, I'm sorry!

www.aempower.com; exedy.com; hksusa.com; jhpusa.com (Mugen); jtuned.com; lakai.com; mackinindustries.com (Advan/Project /ARC); mobworks.com; pioneerelectronics.com; sparco.com; tees-usa.com; tein.com (Carbing/Takata); vonzipper.com; xerotalent.co

Keep your RSX up to dateWhen you get tired of the way your car looks, what should you do? Upgrade, of course. Early model RSX owners can opt for the '05-06 front end and taillights, but it does require you to change a few parts, like the front bumper, headlights, headlight brackets and wiring assembly, rear bumper, taillights, taillight brackets, rear bumper brackets and tailgate harness. But be forewarned, this isn't something everyone can afford, especially if you're looking to add the entire Mugen aero package. Fred gave us a breakdown on the dollar amount you'll have to fork out to achieve N1 Mugen status.

Mugen Front Bumper & Under Cover Kit $1188.00
Mugen Rear Wing Kit ................................ $1375.00
Mugen Side Step ....................................... $737.00
Mugen Canards .......................................... $132.00
Mugen Rear Apron ..................................... $800.00
Honda ITR HID ........................................... $2300.00
Honda ITR Taillight Assembly .................. $700.00
Total: ......................................................... $7,232.00

BROWSE CARS BY MARKET

MORE FEATURES

The production version of Nissan's 700hp. million dollar-plus GT-R50 by Italdesign stays true to the concept
Kelly PleskotDec 7, 2018
Toyota will debut the Supra at the Detroit auto show, and it turns out Lexus has a treat for us as well
Kelly PleskotDec 6, 2018
Marcel Lech used to think 450 hp was all he needed to enjoy his Supra. Instead, he ended up with nearly 1,000 hp that, at best, gets used, weather permitting, only a few of days and just 2 seasons out of the year.
Aaron BonkDec 6, 2018
The Regera-based Koenigsegg Naked Carbon is said to be impervious to weather and less likely to pick up rock chips, as well as being 44 lbs. lighter than the painted version.
Collin WoodardDec 6, 2018
A hot front-wheel-drive, turbocharged hatch that comes with the right kind of balance: not as "grown up" as a VW GTI, but not as aesthetically loud as a Civic Type R.
Austin LottDec 5, 2018
Sponsored Links

SEARCH ARTICLES BY MAKE/MODEL

Search
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS
TO TOP