Super Street Network

 |   |  1,000hp Hyundai Genesis Coupe by Bisimoto Engineering
Subscribe to the Free
Newsletter

1,000hp Hyundai Genesis Coupe by Bisimoto Engineering

Twin-Turbo V-6 beast coming to 2013 SEMA show

Annette Carrion
Sep 23, 2013

Last year at SEMA, Hyundai debuted a special-edition 2013 Veloster RE:MIX, which attracted a lot of attention. This year, Hyundai has outdone itself by partnering with Bisimoto Engineering to create a 1,000hp Genesis Coupe for the 2013 SEMA show in Las Vegas. The show takes place Nov. 5-8.

Bisimoto hyundai genesis coupe Photo 2/3   |   Bisimoto Hyundai Genesis Coupe

Using a naturally aspirated Genesis Coupe 3.8 R-Spec engine as its platform, Bisimoto added newly designed internal parts and a turbo system to the factory-based 3.8-liter V6 engine, which included steel connecting rods, intake gasket, injectors, and level 2.4 camshafts. The car also features a Burns stainless exhaust.

“The key to producing reliable, high-horsepower engines goes well beyond the design, engineering and fabrication of performance parts. The core powerplant must be strong enough to withstand advanced modifications. The Genesis Coupe 3.8-liter Lambda engine is a thoroughly robust powerplant, and Bisimoto Engineering is excited to develop it to its full potential for the rigors of competitive motorsport,” said Bisi Ezerioha, owner of Bisimoto Engineering.

Additionally, Bisimoto created a custom Electric Blue paint, Denmatic design graphics package, Bisimoto rear badge, ARK hood and Carbon Fiber trunk lid.

Bisimoto hyundai genesis coupe front Photo 3/3   |   Bisimoto Hyundai Genesis Coupe

1,000hp Genesis Specs

Platform: Stock Hyundai Lambda 3.8-liter V6 engine

    Engine Components:
  • Steel connecting rods
  • Intake gasket
  • Injectors
  • Level 2.4 camshafts
  • Twin Bisimoto/Turbonetics BTX6462 turbochargers
  • Godzilla blow-off valve
  • Dual RG45 wastegate
  • Arias forged pistons
  • Golden Eagle sleeves
  • WPC metal surface treatment
  • Supertech valvetrain
  • Vibrant VanJen clamps and stainless hardware
  • Magnafuel 750 fuel pump
  • ARP head, main, and wheel studs
  • Portflow custom headwork
  • AEM Infinity EMS
  • Custom smart ignition coils
  • NGK Iridium spark plugs
  • Puröl Elite synthetic oil
  • Spearco intercooler
  • Griffin radiator
  • Kinsler fuel filters
  • Bisimoto-spec Action Ironman clutch

    Chassis Modifications
  • Bisimoto roll cage
  • Progress coilover suspension and anti-roll bars
  • Drive Shaft Shop 5.9 Axles and driveshaft
  • Incurve 20x9.5 and 20x11 aluminum wheels
  • Toyo Tires R888 R-Compound tires

    Interior Modifications
  • Buddy Club racing seats and harness
  • Bisimoto reservoir socks
  • Racepack IQ3 dash
  • Bisimoto oil cap
  • Odyssey dry cell battery
  • Rywire mil-spec harness
  • G&J braided lines

By Annette Carrion
124 Articles

BROWSE CARS BY MARKET

MORE FEATURES

If the Brembo founders peered into a crystal ball, they would have been incredulous to see the exponential growth of their venture.
Lizett BondMar 27, 2017
The next Honda Civic Si will make 192 lb-ft of torque, according to an email that went out to fans a little too early.
Jonathon KleinMar 27, 2017
Sleek new third generation Bentley Continental GT was recently spied during a winter testing session.
Conner GoldenMar 27, 2017
2015 champ Fredric Aasbo and Papadakis Racing again take the road less traveled with the 1,000 HP, FWD-to-RWD converted Rockstar Energy Drink, Nexen Tire Toyota Corolla iM
Bob HernandezMar 27, 2017
A few days with this sexy Italian makes us contemplate life, lust and the value of luxury.
Lizett BondMar 27, 2017
Sponsored Links

SEARCH ARTICLES BY MAKE/MODEL

Search
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS
TO TOP