Super Street Network

Due to the EU’s Global Data Protection Regulation, our website is currently unavailable to visitors from most European countries. We apologize for this inconvenience and encourage you to visit for the latest on new cars, car reviews and news, concept cars and auto show coverage, awards and much more.MOTORTREND.COM
 |   |  2008 Mitsubishi Lancer Evolution X (CZ4A) - Return Of The Street Sharks
Subscribe to the Free

2008 Mitsubishi Lancer Evolution X (CZ4A) - Return Of The Street Sharks

Dressed to kill in Esprit.

Rhett Baruch
Oct 21, 2013
Photographer: Brad Sillars

Raymond Leung politely asked that I not mention his description of the Evo X as projecting a sharklike aesthetic. Well, he knows he is not alone. It has been a definite love/hate opinion of the revamped and always adorned--more so beforehand--Mitsubishi Evolution. After countless reviews of the older, more aggressive models we have all come to terms; the predecessor has its faults. Most should appreciate this transition as an awkward growing phase that follows suit of where the Japanese muscle inevitably has to go.

2008 mitsubishi evo x varis runduce front bumper 02 Photo 2/8   |   2008 Mitsubishi Lancer Evolution X (CZ4A) - Return Of The Street Sharks

When Raymond was finally in the market for his first car, the Evo IX availability as a new purchase had lapsed. It would be unknown territory and an experiment to jump into either the Evo X or Subaru STI, but he would know that answer after Subaru's failure to impress. The STI had further emphasis on the complaints of refinement both new chassis received. As these cars evolve, they often are bashed for the grown-up and soft style that does, in fact, translate to a more disconnected sense of control. It isn't this way for reasons of performance lacking; it's simply the idea of technology assisting in your objective to hopefully go faster. In comparison to other makers, there is a certain pace of safety that needed to be met that Evos fell short of. Simply, it became a legal and moral demand of the consumer market alike that requires safety, design, and comfort all in one. Without straying too far from the subject, it's something I still find troubling to come to terms with myself. The days past of simplistic, raw, and hold-onto-your-pants traits of the nostalgic imports that paved the way for today's factory racers are long gone. Technology trumps what your mind and body thinks is best and takes the reins, but that's quite all right with most, so long as it turns a faster lap time.

Although the vehicle appears to have grown in exterior dimensional specifications, according to factory specifications, it hasn't veered far off from the previous generation. It has, however, gained some weight with the addition of five airbags and other structural safety changes. It does make up for the added weight with the U.S. introduction of Active Yaw Control, formally a Japanese and U.K.-only feature. This bit of genius mechanical technology is able to electronically distribute torque to give a near rear-wheel-drive reaction in throttle control. This accounts for a .99g lateral grip (200-foot skidpad) that ranks it near the top of the grippiest road cars ever. I believe it is a hint of what the car's future technologies and abilities can bring.

2008 mitsubishi evo x varis runduce rear diffuser 03 Photo 3/8   |   2008 Mitsubishi Lancer Evolution X (CZ4A) - Return Of The Street Sharks

Raymond spent a year comprehending the vehicle in its entirety before he began tinkering on his daily driver. That's something to really respect in this hasty world of readily available automotive modifications. He referenced older builds that were simple, well thought out, and thoroughly diagnosed to determine what performance fields he felt needed a pick-me-up. Raymond spent many summer vacations in Hong Kong, where there was clearly a more open market for Japanese domestics. It exposed him to many of the machines the States didn't yet have. Raymond says, "Ever since the movie Legend of Speed (1999) that featured an Evo V racing a WRX, I fell in love with cars."

When it came time to getting down to business on the car, business was made. As you may be aware, Chicago is a great place to have an Evo and want to modify it. The guys down at Touge Factory Works are well known in the drift scene and all around for building finely tuned and fabricated cars. They were able to act as a coach to help guide the build in the right direction, as well as being able to utilize the Evo as a test mule of sort. Through the entire four-year build there has been no failure or issue with the modifications fitted to the car. Granted, the engine has not received much change from OEM. That mainly comes back to the original philosophy behind the build, but he also felt that the 4B11 is balanced enough out of the box. The twin-cam MIVEC now cranks out somewhere near 340 ponies and 370 lb-ft of torque with a few lightweight bolt-ons. Touge Factory fabbed a very trick dual canister, quad-tipped full titanium catback that drops an estimated 30-plus pounds from stock. Gruppe M is well known for over-the-top, but functional intake designs and the X's is no exception to this. The design encloses the filter like stock, but plumbs more refined airflow to a built-in velocity stack constructed completely out of carbon fiber. An upper intercooler pipe, again made with titanium, offers a bit more weight savings--another fine piece offered by Touge Factory. And finally a simple, but crucial bit of hardware keeps the factory turbo even more efficiently flowing via front-mount cooling provided by AMS.

2008 mitsubishi evo x touge factory catback exhaust 07 Photo 4/8   |   2008 Mitsubishi Lancer Evolution X (CZ4A) - Return Of The Street Sharks

Factory lines are dramatic, and aerodynamic additions to the body hint to those of Super GT and Le Mans racers. From the front bumper all the way to the boot, the car begs for more bulbous aero additions. Bulletproof Automotive is quite famed for their ability to source the newest and best parts Japanese tuners have to offer. When it came time to kick the exterior up a notch, Bulletproof was there. Raymond made it through a few rounds of exterior setups from Varis, but ultimately has settled on the Runduce collaboration. The front offers an FRP lip that adds a more flowing, but still sharp characteristic to the asphalt-eating front air dam from Varis. That is an important aspect to uphold for this owner, since he says the build was completed in hopes to add back some of the previous generation's sharper lines. To help cool the intake air temps and exhaust stale air from underhood, C-West provides one of the highest-quality carbon hoods on the market--truly a crucial piece in rounding out the front end. If the side decals didn't give it away, the car is fitted with a massive Esprit 052 carbon GT wing in the even more appalling track edition measuring in at 1,650mm wide! The final aerodynamic addition is the Varis rear diffuser in carbon that scavenges the last of the trapped warm air and looks pretty stunt. We don't believe we will ever get over-functional and nonfunctional uses of rear diffusers, you with us? Completing the last bits of performance-enhancing parts comes way of a prototype suspension type offered to Raymond from Touge Factory. The ISM Air Cup Coilover system replaced the proven and still great Stance coilover mated with Swift springs setup. The in-cabin height control assures the juiced-out specs of the Advan GT's are displayed properly. When track days roll around, a set of Gram Lights 57 Xtremes in Winning Blue are nutted down with Project Kics R40's.

The car is, and will continue to be, Raymond's commuter so he enjoys the added Bride Stradia in Kevlar. In fact, he claims that these seats are one of the best modifications on the car so far. The plan is to continue to modify single pieces of the car at a time in order to truly feel out an investment of quality at this level. Some power modifications are planned, but overall it is to continue enjoying what he purposely built the car to do and enjoy for many years to come. The chassis may see additions extreme as a welded-in rollcage, depending on how track oriented the car becomes in development. Raymond was able to gracefully mix the luxury, safety, and performance of a contemporary but legendary sports saloon. Although, he does foresee a bit of actual VIP tuning in the future, for now the plan is to continually develop the car and his on-track driving skills.

2008 mitsubishi evo x advan GT wheel 04 Photo 5/8   |   2008 Mitsubishi Lancer Evolution X (CZ4A) - Return Of The Street Sharks

Behind the Build

Raymond Leung

Chicago, IL

Mechanical Engineer

Build Time.
4 years

"Over the years I saw the direction of the tuning scene going 'hella flush' and 'stance'. There just weren't a lot of quality builds anymore. Seeing Too many people driving around with replica parts competing for Internet fame further increased my desire for quality part choices."

2008 mitsubishi evo x advan GT wheel 05 Photo 6/8   |   2008 Mitsubishi Lancer Evolution X (CZ4A) - Return Of The Street Sharks

'08 Mitsubishi Evo X (CZ4A)

340 whp at 6,600 rpm 370 lb-ft of torque at 4,300 rpm (dyno)

Engine Coltspeed carbon-fiber ram air intake, red engine cover, hood dampers; Touge Factory Prototype quad-tip titanium catback exhaust, titanium upper intercooler pipe; Ichiba test pipe; Blitz turbo intake pipe; AMS 3.5-inch FMIC; NGK spark plugs; HKS LE oil cap, radiator cap; Project Mu reservoir sock; Motul V300 motor oil; Open source Stage 2 tune by David Lee

Drivetrain Competition Clutch Stage 3 2600 segmented ceramic clutch; TWM short shifter; AMS solid shift cable bushings; Works urethane shift 'cage bushings

Suspension Stance Pro Comp 2 coilovers with Swift 12K/11K springs; Prototype ISM air cup system; Coltspeed front strut bar; Cusco rear strut bar; Whiteline RCAs

Wheels/Tires Advan GT white, front: 19x10.5 +15, rear: 19x10.5 +15; 275/30/19 Hankook Ventus V12 Evo K110; Kics R40 Neo Chrome finish

2008 mitsubishi evo x coltspeed carbon fiber ram air intake 06 Photo 7/8   |   2008 Mitsubishi Lancer Evolution X (CZ4A) - Return Of The Street Sharks

Brakes OEM Brembo; Racing Brake pad ET-500; Goodridge stainless steel brake line; AMS adapter plate for Evo IX clutch master cylinder; Motul RBF600 fluid

Exterior Varis/Runduce front bumper, front lip, carbon-fiber side underboards, half carbon-fiber rear diffuser, side fender vents; Cwest CF GT hood; Esprit 052 GT wing (1,650mm track edition); APR roof vortex generator; Craftsquare TC-F side mirrors; Junack LED DRL foglights; Philips 6,700K bulbs; LAILE towhooks; Coltspeed front emblem; '10 taillights; A&L Autobody respray in Wicked White

Interior Bride Stradia carbon Kevlar seats, seat rails, shift boot; Takata four-point long harnesses; A'pexi boost, water, oil pressure gauge; Innovate LC-1 A/F gauge; Greddy Informeter Touch; Personal Trophy steering wheel; Works Bell short hub; NRG quick release 2.5; Varis SPL Maziora painted shift knob; Ralliart titanium pedals

Ice OEM Rockford Fosgate

Gratitude "I would like to thank Mike and David Lee and all the employees at TF-Works for the sponsorship and helping me on every step of the build during the four years that I have been with them; everyone from my car crew, 4Star Society, for supporting me; JDM Chicago for having such an awesome community to help influence me and go further on my build; Competition Clutch for sponsoring me; Takehiro from Junack USA for giving me the first few sets of Transblades to try out on my car; and Bulletproof for assisting in sourcing the hard-to-get parts."

Special Thanks: JDM Chicago, Varis

2008 mitsubishi evo x c west CF GT hood 05 Photo 8/8   |   2008 Mitsubishi Lancer Evolution X (CZ4A) - Return Of The Street Sharks


Mackin Industries
Santa Fe Springs, CA 90670
Competition Clutch
Conyers, GA 30012
Touge Factory
Wheeling, IL 60090
Bulletproof Automotive
Hawthorne, CA 90250
It's Proper
Wheeling, IL 60090
By Rhett Baruch
2 Articles



Ted Ryon has always carried a torch for Datsun's long-nosed classic, in particular one he could turn into a resto-mod build and shoehorn a more modern RB straight-6 engine into.
Bob HernandezMar 27, 2020
A behind the scenes look at our photoshoot with Masataka Ikeda's AE86 and AE70 Corollas
Sam DuMar 27, 2020
It's not fair, pitting two of the finest examples of Z-car restomods against one another but that's what makes our SS Battle series so interesting.
RodrezMar 27, 2020
Looking for some automotive-themed diversions right about now? We bet you are. Looking for a deal? Aren’t we all. Then do we ever have an offer for you! For a limited time, new subscribers can sign up for the MotorTrend Streaming Service for just one dollar a month. What do you get for that buck?
Mike FloydMar 25, 2020
At a glance this Civic doesn't look like much. It's only upon close inspection that you really begin to see the gravity of this build and the years of experience the owner has brought to the table...
Sam DuMar 25, 2020
Sponsored Links