Super Street Network

Due to the EU’s Global Data Protection Regulation, our website is currently unavailable to visitors from most European countries. We apologize for this inconvenience and encourage you to visit for the latest on new cars, car reviews and news, concept cars and auto show coverage, awards and much more.MOTORTREND.COM
 |   |  2012 BMW 328i - N20 Evolution
Subscribe to the Free

2012 BMW 328i - N20 Evolution

Pushing the limits of the 328i’s 2.0L N20 turbo motor

Peter Wu
May 28, 2014

Clearly Fred Su, the owner of Evolution Racewerks, knew something I didn't when he declined to ride shotgun during my test drive of his modified 328i. "Motion sickness," he claimed, but there was more to it than that...

Having just completed a full line of upgrades on his '12 F30 328i, Su knew he had created a monster and was concerned that a ride in the passenger seat would induce terror rather than motion sickness.

2012 BMW 328i 335i rear valance and diffuser 03 Photo 2/9   |   2012 BMW 328i - N20 Evolution

This ER 328i first appeared in EC 10/12 as the test mule for Su's new intake and downpipe. Coupled with a Burger Motorsports Juicebox engine management system, the setup netted an average of 35whp and 36 lb-ft over the baseline, resulting in best dyno runs of 271whp and 292 lb-ft of torque. To give you an idea, these numbers produced by the N20 2.0-liter four-cylinder turbo engine are similar to or better than we've seen from the stock N55 3.0L six-cylinder turbo.

Since that first test, Evolution Racewerks added its new intercooler, charge pipe and exhaust system. Burger Motorsports also introduced a stage 2 tune for the car to exploit the lower intake temps.

The new ER intercooler has double the frontal surface area of the stock part. It measures 20x11" (versus 20x5.5" stock) and features high-density bar-and-plate cores with more cooling fins than regular intercoolers (18-20 fins per square inch vs 14-16 fins/sqin stock).

The new charge pipe has been made from 6061 aluminum and was, therefore, stiffer than the stock plastic pipe, which was never designed to handle higher boost pressure. The new part was also mandrel bent for smoother airflow, benefiting turbo and throttle response.

2012 BMW 328i LTMotorwerks custom front bumper 04 Photo 3/9   |  
Exterior upgrades include a custom LTMW front bumper, BMW M Sport rear bumper, skirts, trunk spoiler and a BMW 335i rear valance

The new exhaust is referred to as a "modular" system. Its 3" stainless steel piping was cut in sections of standardized length that can be attached with V-band connectors, allowing easy changes between the downpipe, mid-pipe and rear sections. It means owners can switch from a street exhaust with mufflers to a track setup without mufflers in as little as 5min.

The Stage 2 Burger Motorsports software raised boost from 21psi to the 23.38psi it registered during the strongest dyno run we witnessed on the european auto source Mustang Dyno.

With its new parts, the 2.0L turbo motor produced an impressive 312whp at 5400rpm and 355 lb-ft at 3100rpm. This amounted to a gain of 51whp and 63 lb-ft to the wheels.

Even with its improved air flow, drivability hasn't suffered. It still only required a light throttle and little boost for the twin-scroll turbo to blend into stop-and-go traffic. A look at the dyno graph showed there was slightly more torque than stock at 2100rpm and, by 2500rpm, ER's setup gave more than 300 lb-ft at the wheels. This was more than the stock 335i produced at maximum and dwarfed the stock 328i maximum output of 220 lb-ft.

Fred Su confirmed that his test showed the dual exhaust sacrificed some torque in the low- and mid-range when compared to a single-pipe system, but the dual setup made better power in the second half of the rev range. Consequently, ER offers both single- and dual-pipe exhaust systems for the F30 328i.

2012 BMW 328i interior 05 Photo 4/9   |   2012 BMW 328i - N20 Evolution

As one of the most highly modified N20 conversions available, when you want to achieve serious speed, the Evolution Racewerks engine responds willingly. It provides a hefty shove of torque that transitions to horsepower as the revs climb. Yet with power peaking at 5400rpm, and seeming to drop off quickly after that, you don't have to redline the engine. Instead, we would short-shift to keep the motor on the boil, then glance at the speedo to realize you're making the kind of progress normally associated with BMW's M products.

The speed is deceptive, as the F30 chassis is extremely composed. Yet ER tightened it further with a set of CKS C1 coilovers that utilized Swift springs and wider 235/35 front and 265/35 R19 rear Toyo Proxes T1 Sport tires. These were mounted on 19x9" front, 19x10" rear MORR VS8.2 flow-formed wheels.

During our drive, the coilovers were set at six on a scale of ten, making them well suited to both daily driving and high-speed work, especially since the lighter N20 helps the car turn-in to corners more eagerly than the heavier 335i. While the Toyos stuck like fresh epoxy resin, holding a tight line through all kinds of turns.

Slicing through a series of long, fast, sweeping turns at ridiculous speed was easy, with only your comfort level with nearby guardrails, canyon walls and steep descents governing the pace. And after several miles of exploring the car's limits, it was easy to understand why Su declined the ride-along. Yet he should have known the six-piston Brembo front calipers, along with braided lines meant the brake pedal provided a strong bite and good modulation.

2012 BMW 328i 335i rear valance 08 Photo 5/9   |  
ER’s dual exhaust sacrifices some low-end torque for high-RPM power. It sits in a 335i rear valance

On the outside, ER's 328i was the epitome of clean, featuring subtle but distinctive touches such as the 6 Series M Sport front bumper conversion executed by our friends at LTMotorwerks. It fuses the 645i M Sport bumpers' lower section to the stock 328i upper.

The car also wore a pair of BMW M Sport side skirts, carbon fiber rear spoiler and rear bumper with a 335i dual outlet valance and diffuser. The overall effect was a car that gets itself noticed but without fully hinting at its true speed potential.

Many people lamented the loss of the normally aspirated straight-six engine when BMW introduced the N20 2.0T in the F30 328i but, with emissions and fuel economy regulations getting tougher, the BMW turbo engine is winning many fans. And while it lacks the smoothness of the N55 engine, ER's tuning program shows that extracting more power is a lot easier than the comparatively small gains you'd get from an ECU tune and exhaust on the naturally aspirated motor. With the right parts, the power gains are similar to a mildly-modified N55. So for minimal expense, you can punch with the heavyweights while benefiting from improved cornering and better economy that the 328i provides.

2012 BMW 328i M performance carbon shift knob 06 Photo 6/9   |   2012 BMW 328i - N20 Evolution

Tech Spec
2012 BMW 328i
Evolution Racewerks
Baldwin Park, CA

2.0L N20 four-cylinder 16v turbo with Evolution Racewerks intercooler, Competition Series charge pipe, intake, Competition Series 4" downpipe and modular exhaust system, Burger Motorsports stage 2 Juicebox ECU

stock six-speed manual

2012 BMW 328i N20 engine 02 Photo 7/9   |  
Evolution Racewerks intercooler, charge pipe, intake, downpipe, exhaust and Juicebox ECU produced 312whp and 355 lb-ft, making it the one of the most powerful 328i to date

six-piston Brembo front calipers, 355mm two-piece slotted rotors

CKS C1 coilovers, Swift springs

Wheels & Tires
19x9" f, 19x10" r MORR VS8.2 flow-formed wheels, 235/35 R19 f, 265/35 R19 r Toyo Proxes T1 Sport tires

LTMotorwerks custom front bumper, BMW M Sport side skirts, carbon fiber trunk spoiler and rear bumper with BMW 335i rear valance and diffuser

2012 BMW 328i LTMotorwerks front bumper 07 Photo 8/9   |   2012 BMW 328i - N20 Evolution

BMW M Performance carbon and alcantara shift knob

Kip Love at Love's Trim Shop (on Facebook), Danny Colavecchio at Slammered Inc (, Alex and Marcela at EuroSpec Motorsports (on Facebook), Steve, Justin, Arie Abrams


2012 BMW 328i MORR VS82 flow formed wheels 09 Photo 9/9   |  
19" MORR wheels with Toyo tires, Brembo BBK and CKS coilovers.
By Peter Wu
45 Articles



You've just purchased the new NSX but you have too much money left over and you need to spend it on something (we've all been there, right...). That's where AIMGAIN comes in.
RodrezJan 18, 2019
Preview the March 2019 issue of Super Street, with the GReddy x Pandem FC RX-7; a DSM 600HP Talon TSI; an AWD DC2; Shutter Space photo contest roundup; and more!
Bob HernandezJan 18, 2019
In Japan, Toyota is offering a 2.0-liter inline four-cylinder in two different states of tune on the Supra
Kelly PleskotJan 18, 2019
The Lego McLaren Senna kit has 219 pieces and, yes, incorporates the transparent in-door panels of the actual hypercar
Conner GoldenJan 18, 2019
In Japan, Porsche builds have always been a big thing, and lately they've been a bit more visible at events like Tokyo Auto Salon. At the 2019 show, everyone was talking about the 4 Laws 911
RodrezJan 17, 2019
Sponsored Links