Super Street Network

 |   |  2010 Nissan GT-R - King Of The Hill

2010 Nissan GT-R - King Of The Hill

The Trust R35RX GT-R.

Dino Dalle Carbonare
Mar 21, 2012 SHARE
Modp 1204 01+2010 nissan gt r+cover Photo 1/11   |   2010 Nissan GT-R - King Of The Hill

There’s nothing surprising about a power figure as high as 1,200 hp, especially in the world of GT-Rs. The previous generation, powered by the legendary RB26 motor, was always a favorite among drag racers who achieved 1,000+ hp by bolting on a big single turbo or adequately sized twin-turbo setups. While those cars managed to achieve such high power figures from a relatively low capacity of 2.7 liters and up, depending on bottom-end modifications, responsiveness and reliability were hardly their forte; a powerband of about 2000–3000 rpm was all you could hope for. However, with the introduction of the R35 a few years back, things have changed quite a lot. With 3,800cc of capacity, the VR38 engine has increased tuning potential tenfold, and with it introduces a very different type of character. While the R35 might be well suited for straight-line performance — thanks to its AWD system and lightning-quick dual-clutch transmission — it’s in the time attack scene where this car is beginning to shine. There’s no better extreme example of such a vehicle than the Trust (or GReddy, as we know them in the U.S.) GT-R R35RX.

Modp 1204 02+2010 nissan gt r+side view Photo 2/11   |   2010 Nissan GT-R - King Of The Hill

Trust has taken on longtime rivals in the Japanese tuning world, HKS, at their own game. Trust was the first to come up with a turbo kit for the VR38 a couple of years back, a specially matched TD06 setup that would easily allow the large-capacity V-6 to churn out 800 hp. HKS then stepped it up with its own R35 development car that with an all-new GT800-plus kit managed an impressive 1:45 lap around Fuji Speedway (on slick tires).

The next move was Trust’s, and the company hit the drawing board by planning the ultimate setup for the GT-R, something that would prove the potential for power and reliability. With plenty of development and testing having been carried out by GReddy USA on the GR43 stroker kit, the next step for Trust in Japan was to push the limits and begin yet another development program to extract as much power as possible. So with a bulletproof bottom end made up of the RX43 specially treated and sleeved engine block, forged and balanced crankshaft, H-section connecting rods and oversized pistons, the real work began. A lofty goal of 1,200 hp was set, an extra 300 hp over the 900 hp GReddy’s U.S. demo car was making. This called for bigger turbochargers, which came in the form of externally gated RX1200 prototype items. When run at their 30-psi limit, these snails can flow a tremendous amount of air, which meant many other parts had to be redesigned. Larger-diameter RX35 intake and intercooler piping was developed, but there was no way the stock throttles and plenum were going to handle that volume of air. Enter the RX throttles, beautiful items built in anodized billet aluminum and featuring faster-reacting motors for better response. These feed the RX plenum, a large-capacity intake manifold that can easily cope with serious boost and feed the GR43 all the air it needs. A lot of port and polish work was done on the cylinder heads, fine-tuning flow potential and increasing volume. A complete valvetrain upgrade was next, consisting of larger-diameter valves, shims and springs with a set of GReddy 272-degree duration camshafts fitted for both the intake and exhaust sides.

Modp 1204 03+2010 nissan gt r+engine Photo 3/11   |   2010 Nissan GT-R - King Of The Hill

Not surprisingly, 4.3 liters and 30 psi of boost require a serious amount of fuel, so six 1,000-cc/min injectors are mounted along the GReddy billet fuel rail to quench this thirst; a pair of racing fuel pumps and an adjustable fuel pressure regulator finish things off, while the GReddy e-Manage Ultimate piggyback ECU takes care of the engine management. The figures speak for themselves: 1,206 hp and a tractor-rivaling 1,085 ft-lbs of torque. Looking at the power and torque curves, it’s outstanding that there seems to be almost no loss of response, with the engine remaining explosive through the entire rev range — just what you need on a time attack car. Obviously, a setup like this suits larger circuits like Fuji and preliminary tests have shattered previously tuned R35 top speeds at the famed Japanese circuit with the car hitting 202.5 mph on the long straight with Tarzan Yamada at the wheel.

But how about the transmission? Can Nissan’s GR6 dual-clutch transaxle cope with these kinds of figures? The simple answer is no, so Trust has also made sure that things remain as reliable as possible along the driveline. GReddy upgraded clutch packs keep slip in check, while a Dodson first gear cog avoids potential failures. Despite being water- and oil-cooled, the GR6 suffers from extremely high temperatures on track, so GReddy has fitted a transmission cooler and a billet, larger-capacity oil pan kit take care of this.

Modp 1204 04+2010 nissan gt r+wheel Photo 4/11   |   2010 Nissan GT-R - King Of The Hill
Modp 1204 05+2010 nissan gt r+exhaust Photo 5/11   |   2010 Nissan GT-R - King Of The Hill

With most of the mechanical work complete, the people at Trust were beginning to scratch their heads about what to do with the car’s exterior. Obviously, something special was needed, something that would hint at the towering performance from within, and just as Trust was thinking of designing its own body kit, the company came across a few CG images of a wild R35 GT-R on the Internet. Osaka-based aero specialist BenSopra was busy creating what has quickly become the wildest widebody conversion for the R35, and Trust secured one of the first sets for its R35RX. The widebody kit drastically transforms the looks of the R35, doing away completely with the front bumper, hood and fenders, replaced by a massive front-hinged cowl and Super GT–style aero fenders.

As Ueda-san of BenSopra tells us, he had no intention of just designing something for the hell of it; the conversion, which retails at close to $50,000 in Japan, was designed with aerodynamics in mind and a Super GT designer was called in for input. Racing-style side skirts and riveted-on rear overfenders join the front treatment. The rear bumper also gets a complete redesign and is fitted with a wild GT-wing mounted on huge billet stays that sprout from the center of the bumper. A diffuser virtually closes off the underside of the car to help with downforce, while the BenSopra exhaust system exits with two stacked tailpipes on each side. The ribs along the front fenders are highlighted by titanium-look vinyl, and in case you’re wondering, yes, there are side-exit exhausts, but they’re not functional for the time being. In fact, if you look into them, you will find a comical Japanese “under construction” notice, probably where the dump pipes from the wastegates will be routed through in the future. Wheels have been provided by Prodrive Japan, 20-inch GC-012L at each corner fitted with the stock 285-wide Dunlop the car comes with. Massive hub extenders are used at the rear to achieve an acceptable and aggressive stance.

Modp 1204 06+2010 nissan gt r+fender Photo 6/11   |   2010 Nissan GT-R - King Of The Hill

The stock GT-R Brembo brakes are very capable, but more was needed in this case, so all the stoppers were upgraded with lightweight Endless racing monoblock calipers, 6-pots up front and 4-pots at the rear with massive 400mm discs fore and 387mm aft.

Swing open the driver-side door and you’re met by a relatively simple interior. GReddy has refrained from stripping out trim and unneeded things, limiting themselves to the basics. So the heavy electric and heated stock seats are replaced by racing buckets from Race Tech along with TRS harnesses. One of the four air vents has been used to house the GReddy boost gauge, while on the passenger footwell the e-Manage Ultimate ECU has been temporarily positioned for easy access along with the Profec-B boost controller. The ECU has been programmed for three boost levels — 19, 23 and 30 psi — with an overboost function available by pressing the yellow steering-wheel-mounted button.

Modp 1204 07+2010 nissan gt r+computer Photo 7/11   |   2010 Nissan GT-R - King Of The Hill

We won’t be seeing the true potential of this car until the next couple of Fuji Speedway time attack sessions, but it’s easy to tell that Trust is very serious about setting a fast, if not the fastest time, all the while further developing and perfecting the current engine setup. Who knows, maybe this time next year the RX1200 complete engine kit could be available to customers. In the meantime, we’ll keep a keen eye out on HKS to see if they step up and build a GT-R to rival this monster; as of right now, the R35RX is the king of the hill.

Modp 1204 11+2010 nissan gt r+rear view Photo 11/11   |   2010 Nissan GT-R - King Of The Hill

Specs & Details
'10 Nissan GT-R
Engine GReddy RX 4.3-liter stroker kit (treated sleeved block, pistons, H-beam con rods, forged crank)
Engine Modifications RX1200 prototype turbine kit, ported & polished heads, 272º camshafts (intake/exhaust), upgraded valves & springs, metal head gaskets, RX intake plenum & throttle bodies, intake pipes, intercooler & piping, blow-off valves, fuel rail & 1,000cc injectors, oil cooler kit, oil catch can & racing radiator; BenSopra racing exhaust system; Top Secret radiator reserve tank
Engine Management GReddy e-manage Ultimate ECU
Drivetrain Dodson upgraded first gear kit; GReddy DCT upgraded clutch kit, DCT billet oil pan kit; OS Giken LSD
Suspension GReddy racing suspension, 30 kg/mm springs (f) & 32 kg/mm (r); Top Secret adjustable front top upper arms & adjustable pillow ball lower arms
Wheels, Tires & Brakes 20x10.5" Prodrive GC-012L wheels (f/r); Dunlop Sport Maxx GT600 285/35ZRF20" tires (f/r); Endless Advanced 6-pot (f) & 4-pot (r) monoblock calipers & 2-piece 400 mm front rotors & 2-piece 387mm rear rotors
Exterior BenSopra aero kit: front bumper & hood cowl section, front lip spoiler, hood hinge conversion, front fenders, side skirts, rear overfenders & bumper, GT-Wing, rear diffuser, custom Art Factory vinyl wrap
Interior Race Tech RT4900HR racing bucket seats; TRS racing harnesses; GReddy Profec B-Spec II boost controller w/ overboost trigger & turbo gauge

SHARE ARTICLE
By Dino Dalle Carbonare
122 Articles

RELATED ARTICLES

BROWSE CARS BY MARKET

MORE FEATURES

A Golf R that can play with the big boys
Michael FebboNov 21, 2014
Lexus IS 200t expected to arrive next year.
Mike ConnorNov 21, 2014
The hot hatch will have a starting price of $37,415.
Scott BurgessNov 20, 2014
iM will go into production and launch in the fall of 2015
Karla SanchezNov 19, 2014
Check out the latest Gymkhana video here.
Jason UdyNov 17, 2014

SEARCH ARTICLES BY MAKE/MODEL

Search
TO TOP