Ultimo Coilover Kit
Raceland’s newest Ultimo coilover kit fitment has been announced for the Mazda Miata chassis. The coilovers give vehicle owners the unique ability to allow ride height to be set lower than other coilover kits. This is achieved with shortened shock bodies and components, while offering stiffer spring rates and shock valving to ensure ride quality is not sacrificed at that height. The Raceland Ultimo coilover kit is $399 and available for all ’89-’97 Miatas.
Big Bubba BOV
Turbosmart might be famous for fitting a lot of performance into small packages, but that doesn’t mean they don’t appreciate the fact that sometimes bigger is, indeed, better. This is exactly the premise behind the Big Bubba range. Big Bubba is by far the largest valve in the Turbosmart range, and with a heavy-duty, CNC billet aluminum body, and a 2-inch (52mm) hard-anodized aluminum two-piece piston, Big Bubba gives a new meaning to the term hard-core.
The all-new system from Innovate includes a proprietary twin-screw supercharger aluminum intake manifold, molded intake tubing, and all necessary hardware for a bolt-on installation. During the design, extra attention was given to make the system install like original equipment by including features such as specially constructed wiring extension harnesses that plug into factory connectors. Dyno results on 91-octane gasoline have shown more than 40 percent torque gains at the wheels and more than 30 percent horsepower gains through- out the upper rpm range.
Focus St Mounts
These direct bolt-on mounts combine to replace the rear-lower engine torque mount, significantly improving the vehicle’s traction and shifting response by reducing excessive engine flex. Wheelhop during hard launches is also completely eliminated. Boomba Racing mounts are machined from high-quality aircraft-grade billet aluminum, and inside each mount you’ll find solid polyurethane bushings that optimize vehicle stability while also minimizing excessive vibration.
Front Camber Kit
Built for heavy-duty abuse, Truhart’s front camber adjustment kit replaces the stock upper control arm and uses premium ball joints for race-grade applications. The bottom-mounted, non-slip camber plates make for easy adjustment, while the corrosion-resistant finish means you’ll have years of long use.
Hyundai Arms Turbo Kit
After passing extensive testing phases, Tomei’s Hyundai Genesis Coupe upgraded turbo is now here. Each component—from the turbine, to the compressor, and center housing—has been designed to deliver the best all-around balance of performance. The turbo comes complete with the special Tomei compressor housing as well as a forged billet actuator. The ARMS series turbo kits all come with the required gaskets and fitting accessories for a true bolt-on application out of the box.
BMW M3 Cat-Back Exhaust System
The MACH Force XP exhaust system by aFe Power for the BMW (E46) M3 produced 14 hp and 13 ft-lb through its TIG-welded, 2.5-inch mandrel-bent stainless steel piping. It uses dual, high-flow transverse mufflers with a cross-pipe, which equalizes and evenly distributes exhaust pulses for increased flow and performance across the powerband while maintaining a great tone.
BRZ/FR-S Fuel Pump Kit
DeatschWerks now offers the DW65c, an upgraded 265-lph fuel pump for the ’13 Subaru BRZ and Scion FR-S. The DW65c is the only aftermarket fuel pump that allows for proper fitment in the BRZ and FR-S. The compact size and specially designed fitment kit allow the pump to fit where others cannot. Together, the DW injectors and fuel pump make up a package that can support as much as 500 hp.
The Odyssey Extreme series of batteries offers the perfect combination of starting power and deep cycle reserve power needed to start high-compression engines or power high-intensity discharge lights. It can handle any upgrade and can be mounted in almost any position, while sprucing up the engine bay.
Focus St Clutch Kits
SPEC has just introduced a line of performance clutch and flywheel assemblies for the Ford Focus 2.0L Ecoboost. The clutch kits are available in seven different single-disc stages, supporting power levels up to 550 ft-lb. The kits feature higher rpm capability, multiple disc material configurations, and comfortable pedal requirement for good driveability.