If At First Your Wheel Offset Doesn't Succeed - Try, Try, Again You gotta give it up to the wheel guys and their never-ending quests to achieve perfection when it comes to offset. Who can blame them though? Fail in this department and you can kill the look of your car instantaneously. But when it's your job to supply wheels to the public, you'd better make sure your own ride practices what you preach. In Rick Vejphuyarn's case, this is all too true being that he's the ring leader at Venaci Wheels. And since his recent purchase with this 370Z, he went through six sets of wheels and many calculations to finally find the best fit. His step-lipped Mesh wheels measure in at a good 20-inches in diameter (9.5" wide front/10.5" rear) and sit ever-so-flush with the fenders. But it's not just a fancy set of wheels here...
Being one of the first 370Zs we've ever seen modified here in the States, we first took notice of Rick's car at last year's SpoCom show in the HKS booth where it served as the prototype for some of HKS' first mods for the new Z. That includes the intake, exhaust and the coilovers used to lower the car to ground-hugging proportions. You might also notice the body kit from Aero Jacket, a relatively new company to the scene, which offers a front lip spoiler, side skirts, rear diffuser and rear spoiler, all in the holy name that is 'carbon-fiber'. A further walk around the car reveals subtle touches from InStyle Graphics, like the flat black roof overlay and tinting of the head- and taillights.
Clearly the car is far from being finished but we're really diggin' the way it looks being so fresh out of the box. Rick says Stillen's going to be test-fitting a supercharger soon as we're curious to see what a blown 370Z is capable of now that we've seen a couple twin-turbo versions. If it remains as sleek-looking as this and makes mad horsepower, it'll make the 370Z that much more sweet and at the top of cars we're gonna have to revisit (and test drive).
2009 Nissan 370Z
Owner Rick Vejphuyam
Hometown Torrance, CA
Occupation CEO, Venaci Wheels
Engine 3.7L VQ37VHR; HKS intake and exhaust; Stillen headers, oil cooler and catalytic converter; PasswordJDM Kevlar engine cooling panels
Drivetrain Stillen clutch and lightened flywheel; BMP short shifter
Engine Management Techno Square ECU flash
Footwork & Chassis HKS HiperMax III coilovers; Tanabe front/rear sway bars; black chrome OEM strut bar; Cusco front camber arms; SPC rear camber arms
Brakes AP Racing 6-pot (front) and 4-pot (rear) calipers, pads and stainless lines
Wheels & Tires 20x9.5 +15 and 20x10.5 -5 Venaci Mesh step lip wheels; Falken FK452 255/30R20 and 305/30R20 tires; Venaci T1 lug nuts; H&R lug studs
Exterior Aero Jacket body kit with carbon-fiber front lip, side skirts, rear diffuser and rear spoiler; matte black roof and trunk; graphics and head/taillight tinting by InStyle Graphics; STM advanced window film; custom flat black grille
Interior Sparco seats; Sabelt harnesses; HKS shift knob
Audio Clarion NX509 DVD head unit with nav, speakers, amps and subwoofers
Thanks You David Chen and Kevin Roh at Status; Falken Tire; Venaci Wheels; J2 Auto Detailing; HKS USA; Clarion; STM Advanced Window Film Solutions; Aero Jacket; InStyle Graphics; Introholics.com; Stillen; PasswordJDM; Status Autowerks
www falkentire.com,hksusa.com, introholics.com, passwordjdm.com, sparco.com, stillen.com, technosquareinc.com, venaciwheels.com