From the Editors of…

Super Street Network

Honda S2000 Project Car News

Latest Articles

SuperStreetOnline
SuperStreetOnline Magazine
how to
120 Hours - Week To Wicked 2001 S2000 Day 4
It's day 4 of the Week to Wicked build-up and with the turbo kit installed we're back under the car to pull out the old clutch.
Rodrez – May 24, 2018
SuperStreetOnline
SuperStreetOnline Magazine
how to
120 Hours - Week To Wicked 2001 S2000 Day 3
Finishing off the turbo kit while ENEOS steps in to top us off
Rodrez – May 24, 2018
SuperStreetOnline
SuperStreetOnline Magazine
how to
120 Hours - Week to Wicked 2001 S2000 Day 2
The decision to incorporate forced induction on our project car wasn't a difficult one. Rather than struggle to wring 5 or 10 horsepower from the native F20C with bolt-ons, we're reaching for turbo power
Rodrez – May 22, 2018
SuperStreetOnline how to
120 Hours - Week To Wicked 2001 S2000: Day 1
Returned some spring to her step with a set of coilovers from AST Suspension and key bushing replacements from Energy Suspension.
Bob Hernandez – May 22, 2018
SuperStreetOnline how to
120 Hours With An S2K
There's another project car on the horizon for the Super Street staff, but this one is a little different.
Staff – May 17, 2018
SuperStreetOnline
SuperStreetOnline Magazine
how to
2000 Honda S2000 - The Right Clamping Force
We add a Competition Clutch twin-disc race clutch to the S2000.
Andrew Wojteczko – Oct 11, 2012
SuperStreetOnline
SuperStreetOnline Magazine
how to
2000 Honda S2000 - Race Car Spec Brake Setup - Project S2000
Building the best braking system for Project S2000.
Andrew Wojteczko – Oct 10, 2012
SuperStreetOnline
SuperStreetOnline Magazine
how to
2000 Honda S2000 - Adding Race Car Flair - Project S2000
Signage Source turns Project S2000 into a real looker.
Andrew Wojteczko – Aug 29, 2012
Honda Tuning
Honda Tuning Magazine
how to
Project Honda S2000 Suspension - Out With The Old, In With The New!
It’s all around us; from the cars we drive, to the offices we’re slave to, even in the homes we live in. Polyurethane is, in one form or another, heavily used in our day-to-day lives.
Rodrez – Aug 8, 2012
Honda Tuning how to
Honda S2000 AP1 - Project S2000: Out Of The Body Shop
In the last installment of the AP1 build (Dec/Jan 2012 issue), I highlighted some of the parts that would make their way to the roadster’s body after a fresh coat of Spa Yellow paint.
Matt “Rodrez” Rodriguez – May 24, 2012
SuperStreetOnline how to
2000 Honda S2000 - Chassis Prep - Project S2000
Final preparation for paintwork wraps up.
Andrew Wojteczko – Apr 4, 2012
Honda Tuning how to
Honda S2000 - Project S2000: The Revamp - Wrenchin'
The AP1 build that never ended…it just paused for a bit.
Rodrez – Jan 11, 2012
SuperStreetOnline
SuperStreetOnline Magazine
how to
2000 Honda S2000 - Adjustable Geometry, Optimum Handling - Project S2K
We build custom front upper control arm mounts with Spoon gussets.
Andrew Wojteczko – Dec 8, 2011
SuperStreetOnline
SuperStreetOnline Magazine
how to
2002 Honda S2000 - Braking With Balance - Project S2000
Remote-mount, dual master cylinder brake setup.
Andrew Wojteczko – Oct 16, 2011
Import Tuner
Import Tuner Magazine
how to
Project Honda S2K
We’re back with our third and final installment in our quest to build the ultimate street/track Honda S2000.
Scott Tsuneishi – Aug 8, 2011
SuperStreetOnline
SuperStreetOnline Magazine
how to
Increasing Downforce, Reducing Weight - Project S2000
Dual-element wing, carbon trunk and custom chassis mount.
Andrew Wojteczko – Aug 7, 2011
SuperStreetOnline
SuperStreetOnline Magazine
how to
Project S2000 - Preparing For Paint - Tech
We strip the S2000 down to its bare metal
Andrew Wojteczko – May 23, 2011
SuperStreetOnline
SuperStreetOnline Magazine
how to
New Aero For Maximum Downforce - Project S2000
We’ve been waiting in great suspense for this array of JDM awesomeness to arrive. The day when two giant J’s Racing boxes finally arrived at the door, I knew it would be a good one. Naturally, I couldn’t resist and tore into the packaging and unraveled every piece all 26 of them!
Andrew Wojteczko – May 9, 2011
Import Tuner
Import Tuner Magazine
how to
Project Honda S2000 - Part 2
Suspension Upgrades and iVTEC
Scott Tsuneishi – May 5, 2011
Import Tuner
Import Tuner Magazine
how to
Project Honda S2000 - Tech-Knowledge
Building the ultimate street/track machine: Part 1
Scott Tsuneishi – Mar 18, 2011
Load More THE END. CHECK BACK LATER FOR MORE CONTENT.

BROWSE CARS BY MARKET

How-to Classic

SuperStreetOnline Magazine
120 Hours – Week To Wicked 2001 S2000 Day 5

On Day 5, the last day we have hands on the Week To Wicked Honda AP1 S2000, we instal Seibon carbon fiber, Konig wheels shod in Falken rubber, fit a Covercraft cover, and go to GReddy to dyno

Rodrez – May 26, 2018

OTHER ARTICLES BY TYPE

CATEGORY
Features Features : News How to How to : Project Car How to : Paint & Body How to : Chassis & Suspension How to : Engine How to : Transmission & Drivetrain How to : Interior & Electrical How to : Wheels & Tires How to : Additional Tech How to : Aftermarket Parts Event Coverage
Sponsored Links

SEARCH ARTICLES BY MAKE/MODEL

Search
TO TOP