Super Street Network

Due to the EU’s Global Data Protection Regulation, our website is currently unavailable to visitors from most European countries. We apologize for this inconvenience and encourage you to visit www.motortrend.com for the latest on new cars, car reviews and news, concept cars and auto show coverage, awards and much more.MOTORTREND.COM
 |   |   |  Honda Traction Solutions - Drag Tech: Prodrive Hubs
Subscribe to the Free
Newsletter

Honda Traction Solutions - Drag Tech: Prodrive Hubs

Honda traction solutions

Feb 1, 2003
Turp_0302_06_z+prodrive_hubs+hub Photo 1/5   |   ProDrive's Stage 1 Honda/Acura driveline; The Stage 1 hub can be ordered in four- or five-lug (not shown) configurations. In four-lug trim, you get the larger Accord/Prelude spline diameter while retaining the popular Civic 4x100 bolt pattern.

ProDrive has developed Honda traction systems to suit the needs and budget of struggling racers and hard-up power mongers.

The company's Stage 1 system is designed for street/stripuse and can be found in Jarrod Silvers' all-motor drag CRX. The Stage 1 system features components that are directly interchangeable with their OE counterparts, which means you can fortify the area of your driveline that needs it most, and do so with minimal modification.

2019 Honda Civic
$21,450 Base Model (MSRP) MPG Fuel Economy

The Stage 1 setup is available in four- or five-lug con-figurations and consists of a wheel hub, outboard CV joint, nut and four studs. The four-lug setup delivers larger Accord/Prelude spline diameter while retaining the popular Civic 4x100 bolt pattern. The ProDrive outer CV joint also features a stronger bearing cage compared to OE, thus improving durability even with the high stress of drag-style launches.

Turp_0302_04_z+prodrive_hubs+outer_cv Photo 2/5   |   The ProDrive outer CV features a larger Accord/Prelude spline diameter and a stronger bearing cage compared to the factory offerings.

A popular addition to the kit is a set of ProDrive axles. The entire axle, right down to the tripod, is manufactured from solid billet and CNC-precision machined to exact tol-erances. Each axle is then heat-treated to ProDrive specifications and shotpeened to ensure superior durability.

The Stage 2 kit is for high- horsepower race-only cars or those cars that run with big slicks-26-inch, 28-inch or bigger. The ProDrive Stage 2 drivetrain includes spool, intermediate shaft and carrier bracket, inboard CV joint, axle shaft, outboard CV joint, wheel hubs, boot, studs and all necessary mounting hardware

ProDrive also offers drag spools for Hondas, Acuras and Mitsubishi Eclipses.

Sources

Prodrive
866-797-7766
http://www.prodrive.com

BROWSE CARS BY MARKET

MORE HOW TO

WillyWerx, aka William Galan, figures heavily in this last entry of Ryan Hoegner's 911SC, giving a master class in proper vintage Porsche restoration
Bob HernandezFeb 14, 2019
Outfitting a GR WRX with fresh pads and rotors
Bob HernandezFeb 5, 2019
AC Schnitzer used data from 2 record-setting successes to dial in parts developments for the BMW F90 M5
Bob HernandezJan 31, 2019
Shifting our focus to the chassis, in particular revamping this Porsche's suspension as well as its brakes and topping it all off with a one-off roll bar
Bob HernandezJan 29, 2019
Swapping out the VX's original drums for some del Sol Si rear disc brakes.
RodrezJan 15, 2019
Sponsored Links

SEARCH ARTICLES BY MAKE/MODEL

Search
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS
TO TOP