Super Street Network

 |   |   |  November 2009 - Mod Gear
Subscribe to the Free
Newsletter

November 2009 - Mod Gear

Nov 1, 2009

Mahle
K24 Power Pak Pistons

Mahle's new piston assembly kit for the Acura K24 engine provides 9.0:1 compression in an all-forged 4032 aluminum-alloy piston kit that gets the job done with less hassle. Designed as a power-generating, race-ready kit, the Power Pak comes complete with 1.2mm, 2.8mm steel nitrated rings; 22mm (103g) high-quality steel wrist pins; and round wire locks.
www.mahlemotorsports.com

Modp_0911_02_o+november_2009_mod_gear+mahle_k24_power_pak_pistons Photo 2/11   |   November 2009 - Mod Gear

Takeda
RX-8 Short Ram Intake

The Takeda Retain Short Ram air intake for '04-08 Mazda RX-8s replaces the bulky and inefficient factory intake by increasing air volume and improving air velocity for increased horsepower, torque and improved throttle response. It utilizes a specially designed wrinkle black finish intake housing with a huge oval-shaped filter for maximum airflow. Takeda air intakes use the brand-new Pro Dry S filter from aFe, which uses a progressive synthetic media, requiring no oil to recharge for maximum convenience and filtration.
www.takedausa.com

Modp_0911_01_o+november_2009_mod_gear+takeda_rx8_short_ram_intake Photo 3/11   |   November 2009 - Mod Gear

Titan Motorsports
2JZ-GTE High-Lift Cams

After months of development and testing, Titan is proud to release its new high-lift camshaft offerings for the 2JZ-GTE engine. These camshafts are typically suited for engines with turbo combinations of 70mm or larger. If you aren't happy with the results, Titan will give you a 100 percent refund on the price of the cams.
www.titanmotorsports.com

Modp_0911_03_o+november_2009_mod_gear+titan_motorsports_2jzgte_high_lift_cams Photo 4/11   |   November 2009 - Mod Gear

5zigen USA
Hazardous Sports Headcase

5Zigen has become a distributor of the Hazardous Sports Headcase. This great-looking, lightweight carrying case for a helmet has dense molded foam, heat-fused in two layers of Polyfiber performance fabric. It features a large volume, soft inner compartment to fit all helmet brands and types; a tough ballistic nylon exterior, heavy-duty handle; and a heavy-duty mesh side pockets; and an ear piece and utility pocket inside.
www.5zigenusa.com

Modp_0911_04_o+november_2009_mod_gear+5zigen_usa_hazardous_sports_headcase Photo 5/11   |   November 2009 - Mod Gear

Percy's High Performance
Split-Lock Fasteners

Percy's High Performance's new Split-Lock fasteners are available in black oxide or stainless steel. Installation is as simple as installing and tightening the bolt, then tightening a small set-pin. The set-pin in the bolt expands the bolt threads against the thread wall providing an unmatched lock. No clips, small wires or other small pieces to go flying to the dark side of the engine compartment either.
www.percyshp.com

Modp_0911_05_o+november_2009_mod_gear+percys_high_performance_split_lock_fasteners Photo 6/11   |   November 2009 - Mod Gear

AEM Analog EGT & Boost Gauges
AEM's EGT & Boost gauges unite unsurpassed accuracy, speed and control with an easy-to-read, analog interface. The AEM analog gauges also offer a 0-5v analog output for use with data loggers and virtually any engine management system. The EGT & Boost gauges feature a K-Type Thermocouple or AEM 35-psi brass sensor, respectively, making them among the fastest and most accurate gauges available. The backlighting is user adjustable to seven colors, allowing users to easily match the EGT & Boost gauge to most factory gauge clusters.
www.aempower.com

Modp_0911_06_o+november_2009_mod_gear+aem_analog_egt_and_boost_gauges Photo 7/11   |   November 2009 - Mod Gear

Wirestrap
Peel-N-Stick Wire Fastener

Wirestrap, peel-n-stick wire fasteners have been OE equipment for more than 12 years and the company is now making them available publicly. Wirestrap provides an extremely simple way to fasten lightweight, typically low-voltage wires and cables without the need for mechanical fasteners like clips, clamps or screws. It combines the simplicity of peel-n-stick with the strength of high-tensile polyester, offering a fastening method that's as effortless to use as a piece of tape.
www.wirestrap.com

Modp_0911_07_o+november_2009_mod_gear+wirestrap_peel_n_stick_wire_fastener Photo 8/11   |   November 2009 - Mod Gear

Rays Engineering
Volk Racing G10

Rays Engineering has released is latest lineup of wheels and the Volk Racing G10 is among one of the nicest designs. With its large lip and aggressively shaped 10-spoke design, the VR G10 will be an instant hit. Available in a variety of 19-inch sizes.
www.mackinindustries.com

Modp_0911_09_o+november_2009_mod_gear+rays_engineering_volk_racing_g10 Photo 9/11   |   November 2009 - Mod Gear

T1R
R35 Y-Pipe

T1R has launched its new R35 Nissan GT-R exhaust Y-pipe. Made out of SUS304 aircraft stainelss steel with a professional TIG-welding process has reduced weight by 50 percent over the stock unit. Unique 76.3mm twin pipes merge into a 90mm single pipe to improve exhaust efficiency, horsepower and engine response-dyno-proven19 hp at 6200 rpm.
www.typeoneracing.com

Modp_0911_10_o+november_2009_mod_gear+t1r_r35_y_pipe Photo 10/11   |   November 2009 - Mod Gear

Tomei
Universal FPR

Tomei's latest universal fuel pressure regulator provides rock solid adjustable fuel pressure no matter how large your fuel requirements are. It is made from billet aluminum with a hard anodized finish not only looks great, but it's able to cope with the extreme underhood temperatures due to its solid design.
www.tomeiusa.com

Modp_0911_11_o+november_2009_mod_gear+tomei_universal_fpr Photo 11/11   |   November 2009 - Mod Gear

Sources

5Zigen
Carson, CA 90746
310-608-5575
http://www.5zigenusa.com
AEM
Hawthorne, CA 90250
800-992-3000
http://www.aempower.com
Takeda
Corona, CA 92879
951-493-7100
http://www.takedausa.com
Tomei Powered USA, Inc.
Lake Forest, CA 92630
949-855-6577
http://www.tomeiusa.com
Titan Motorsports
Orlando, FL 32824
407-277-8423
http://www.titanmotorsports.com
Percy's High Performance
Camdento, MO
573-346-4409
http://www.percyshp.com
Rays Engineering
Santa Fe Springs, CA 90670
562-946-6820
http://www.mackinindustries.com
T1R
Richmond B.C. V6V 0A4, CA
604-279-0329
http://www.typeoneracing.com
Wirestrap
Plymouth, MO 48170
866-677-6665
http://www.wirestrap.com

BROWSE CARS BY MARKET

MORE HOW TO

In a world where high-power V8s dominate, this 2.7L Toyota proves a force to be reckoned with.
Evan PerkinsSep 11, 2018
Produced for over 13 years in practically every configuration imaginable, the SR20 family of engines powered 18 different Nissan/Infiniti platforms throughout the world
Richard FongAug 31, 2018
New suspension parts for your build
RodrezAug 28, 2018
Super Street's Engine Tuning and Monitoring buyer's guide
RodrezAug 24, 2018
An age-old debate exists between the camps of Nissan and Toyota fans, discussing the virtues and shortcomings of Nissan's RB26DETT and Toyota's 2JZ-GTE.
Richard FongAug 23, 2018
Sponsored Links

SEARCH ARTICLES BY MAKE/MODEL

Search
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS
TO TOP