Super Street Network

 |   |   |  Motegi Racing MR125 Racing Wheel and More - Mod Gear
Subscribe to the Free
Newsletter

Motegi Racing MR125 Racing Wheel and More - Mod Gear

Spring Is Almost Here, So Prepare Yourself For Car Season!

Mar 16, 2011

Motegi Racing
MR125 Racing Wheel
This track-inspired 7-spoke is manufactured using Motegi Racing's Flow Form Technology (FFT). This process manipulates the material flowing into the rim wall in a manner that the wall thickness can be reduced, while maintaining the strength and durability of a thicker and heavier wheel. The MR125 features Motegi's new two-piece center cap that consists of an engraved outer aluminum ring and a molded centerpiece that allows the owner to run cap open or covered. The MR125 is available in a Satin Black or Titanium Silver finish.
motegiracing.com

Modp_1103_03_o+motegi_racing+mr125_racing_wheel Photo 2/11   |   Motegi Racing MR125 Racing Wheel and More - Mod Gear

Skunk2
Megapower header for RSX and Civic Si
Skunk2's MegaPower header is designed and engineered to maximize exhaust flow and increase both horsepower and torque throughout the powerband. Each Skunk2 MegaPower header features equal-length, sequentially paired, stepped primaries and a 4-2-1 tri-Y design that terminates into a collector with a 2.5-inch outlet. These features, paired with Skunk2's unique design specs, provide an extremely broad powerband that's applicable to a wide range of engine sizes and configurations.
skunk2.com

Modp_1103_05_o+skunk2+megapower_header_for_rsx_and_civic_si Photo 3/11   |   Motegi Racing MR125 Racing Wheel and More - Mod Gear

AFE Power
Lexus IS-Fair filter

All aFe performance air filters produce high flow to increase horsepower, torque, throttle response and fuel mileage without substituting filtration efficiency. The unique polyurethane progressive bump seal provides a superior seal and keeps debris from flowing through the filter. All aFe filters are washable and reusable and have a limited lifetime warranty. In recent testing, this filter flowed 66 percent more than the factory air filter.
afepower.com

Modp_1103_04_o+afe_power+lexus_is f_air_filter Photo 4/11   |   Motegi Racing MR125 Racing Wheel and More - Mod Gear

Takeda USA
'06-10 Civic
Cold Air Intake
This intake utilizes specially designed two-piece polished aluminum intake tubes to efficiently guide the air into the motor and also provide an aggressive touch of style. Takeda air intakes use Pro Dry S filters, which require no oil to recharge for maximum convenience and filtration. In recent testing, this intake produced 7 hp and 7 ft-lbs of torque over stock and out-flowed the factory intake by 37 percent.
takedausa.com

Modp_1103_02_o+takeda_usa+civic_cold_air_intake Photo 5/11   |   Motegi Racing MR125 Racing Wheel and More - Mod Gear

DEI
Typhoon Turbine
The Typhoon is a turbine designed to feed nitrous into the throttle body, bringing a new and efficient way to improve delivery of nitrous into your motor. Using the 900-1,000 psi of pressure created during nitrous activation, the Typhoon turbine acts like a jet engine, revving up the flow of the mixture into the engine and increasing horsepower and torque by up to 20 percent. The Typhoon turbine housing is CNC machined from billet aluminum and is capable of spinning at 10,000-12,000 rpm.
designengineering.com

Modp_1103_06_o+dei+typhoon_turbine Photo 6/11   |   Motegi Racing MR125 Racing Wheel and More - Mod Gear

Greddy
R35 GT-R Front-Mount
Intercooler kit
Helping push the limits of the R35 GT-R, GReddy announces the release of its new front-mount intercooler upgrade. The complete kit features an extra-large, high-cooling, Type-29, R-spec intercooler core, which is ideal for over 900 hp. Four specially designed lightweight three-piece end tanks smooth out the flow for a side-to-side, cross-flow setup for increased efficiency. This configuration keeps the upper grille area open for vital engine cooling.
greddy.com

Modp_1103_08_o+greddy+r35_gt r_front mount_intercooler_kit Photo 7/11   |   Motegi Racing MR125 Racing Wheel and More - Mod Gear

Kameari Engine Works
Complete Datsun tuning package
Based in Tokyo, Kameari Engine Works has earned its reputation as a legendary Datsun Z tuning specialist, manufacturing a line of ultra-high-quality engine and chassis products for the classic Datsun 240Z to 280ZX. With more than 30 years of experience in classic car tuning, Kameari is the trusted choice of classic racers, tuners and restorers in Japan. Products are also available for the Datsun L4, FJ20 and A15 engines. Toyota products are available for the 2TG and 18RG engines.
kameariusa.com

Modp_1103_11_o+kameari_engine_works+complete_datsun_tuning_rackage Photo 8/11   |   Motegi Racing MR125 Racing Wheel and More - Mod Gear

Wiseco
Nissan SR20 and SR20DET pistons
Wiseco pistons feature 9:1compression with a -17cc dish. Generous valve reliefs allow for more options for cams and valve choices. Coated with Wiseco's ArmorGlide skirt coating, you'll get reduced friction and improved wear resistance. Piston domes have been brush deburred to remove sharp edges to help prevent detonation, and the kits come complete with Wiseco's dedicated ring set. These rings have a stainless steel gas nitride top ring, cast iron Napier hook second ring and flex-vent oil ring with gas nitride scraper rails.
wiseco.com

Modp_1103_10_o+wiseco+nissan_sr20_and_sr20det_pistons Photo 9/11   |   Motegi Racing MR125 Racing Wheel and More - Mod Gear

Prolong
Waterless
Wash & Shine
The Waterless Wash & Shine formula features special lubricating agents to encapsulate dirt, sap, tar and bugs so they can be removed with ease. Simply spray the product on the car surface and wipe away with a terry cloth towel, leaving a beautiful just-waxed shine and smoothness. Waterless Wash & Shine is designed to clean most exterior car surfaces, including paint, chrome, plastic trim, painted plastic, wheel rims, headlamp covers and glass.
prolong.com

Modp_1103_07_o+prolong+waterless_wash_and_shine Photo 10/11   |   Motegi Racing MR125 Racing Wheel and More - Mod Gear

Sikky Manufacturing
IS-F race headers

The Sikky IS-F race header was designed to give maximum power and reliability, resulting in an astounding gain of 50+ hp and more than 26 ft-lbs of torque at the wheels. The Sikky IS-F headers come standard with a highly polished aluminum ceramic coating capable of withstanding 1,300 degrees Fahrenheit; the coating has excellent thermal properties, cutting down on underhood heat and increasing horsepower.
sikky.com

Modp_1103_09_o+sikky_manufacturing+is f_race_headers Photo 11/11   |   Motegi Racing MR125 Racing Wheel and More - Mod Gear

BROWSE CARS BY MARKET

MORE HOW TO

A six-pack of items of which everyone should be conscientious
Richard FongDec 6, 2018
Giving a daily some much need modernization
Bob HernandezNov 15, 2018
In a world where cars steer, brake, and even park themselves, the Scion FR-S begs to be tossed at apexes with reckless abandon
Evan GriffeyNov 6, 2018
Who knew you could fix toe on a rear twist beam cars with such a simple kit?
Bob HernandezOct 30, 2018
These new snails aim to change the game, boasting the highest output from the smallest package.
Richard FongOct 12, 2018
Sponsored Links

SEARCH ARTICLES BY MAKE/MODEL

Search
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS
TO TOP