Super Street Network

 |   |   |  Forced Induction Buyer’s Guide
Subscribe to the Free
Newsletter

Forced Induction Buyer’s Guide

The latest in forced induction products

May 22, 2009

Verocious Motorsports
Silicone Hose Couplers
Verocious Motorsports’ 100 percent made-in-the-USA, race-quality, three- and four-ply silicone hoses are perfect for connecting the intercooler and intake tubes on your turbocharged car. The company only uses high-quality polyester and aramid fabrics as reinforcement for the high-temperature silicone hoses.
www.verociousmotorsports.com
302-472-0601

Modp 0905 01 o products verocious motorsports Photo 2/25   |   Forced Induction Buyer’s Guide

Agency Power
R35 GT-R Intercooler Piping
Agency Power’s Intercooler kit for the Skyline GT-R utilizes larger 3-inch 6061 aluminum piping, resulting in less restriction and the ability to maintain boost pressure more efficiently when boost is increased. The intercooler pipe kit retains all factory sensor locations and is available in a wrinkle red or a polished finish.
www.agency-power.com
480-921-7422

Modp 0905 02 o products agency power piping Photo 3/25   |   Forced Induction Buyer’s Guide

AMS Performance
Subaru Rotated Mount V-Band Turbo Kit
The AMS Subaru Rotated Mount V-band Turbo kit is the new benchmark in Subaru performance. Designed to meet the demanding needs of road race, drag race and street cars alike, AMS has successfully achieved unparalleled driveability, response and horsepower. Each kit is hand-built at AMS with meticulous attention to detail.
www.amsperformance.com
847-709-0530

Modp 0905 03 o products ams v band kit Photo 4/25   |   Forced Induction Buyer’s Guide

Agency Power
’08-And-Later WRX Intercooler Kit
Agency Power has developed a 2.5-inch complete intercooler replacement kit for your Subaru STI and WRX with little modification needed to the front bumper to fit the new front-mount design. The bar and plate intercooler core is designed to provide maximum cooling efficiency and the pipes and couplers are available in black or red.
www.agency-power.com
480-921-7422

Modp 0905 04 o products agency powerintercooler Photo 5/25   |   Forced Induction Buyer’s Guide

ARC
R35 GT-R Intercooler
ARC intercoolers are designed to get maximum cooling for turbocharged vehicles. The inner structure was designed so that a large volume of air can travel through as free-flowing as possible, and the outer fins were pushed backward to make sure all the air can pass through to cool down the intercoolers.
www.mackinindustries.com
562-946-6820

Modp 0905 05 o products arc intercooler Photo 6/25   |   Forced Induction Buyer’s Guide

AMS Performance
EVO 8 AND 9 GT850R Turbo Kit
This highly efficient header and collector design promotes quick spool and produces maximum power, allowing the user to take full advantage of the true ball-bearing GT series Garrett turbochargers that AMS offers. Proven to spool nearly as quick as a GT35R and capable of making in excess of 700 whp.
www.amsperformance.com
847-709-0530

Modp 0905 06 o products ams performance Photo 7/25   |   Forced Induction Buyer’s Guide

DC Sports
Turbo Manifolds
These are the perfect upgrade for customers looking to extract the most power from their factory turbocharged vehicle. DC Sports uses special manufacturing techniques to virtually eliminate the chance of failure, including using a slower weld process and a thicker rod for deeper weld penetration and purging the inner tube sections with argon gas to strengthen the backside of the welds.
www.dcsports.com
626-968-5147

Modp 0905 07 o products dc manifolds Photo 8/25   |   Forced Induction Buyer’s Guide

Cobb Tuning
EVO X Hard Pipe Kit
The COBB EVO X Intercooler Hard-Pipe Kit replaces all intercooler pipes (including the BPV tube) with weld-free, single-pipe aluminum tubing. Custom silicone hose couplings and heavy-duty T-bolt clamps put an end to embarrassing hose blow-offs. With the most performance features, precise fitment and one-of-a-kind appearance, this kit is unequaled.
www.cobbtuning.com
801-713-0035

Modp 0905 08 o products cobb tuning piping Photo 9/25   |   Forced Induction Buyer’s Guide

Cosworth
Mazda MX5 Supercharger
The Cosworth bolt-on Supercharger system for the ’06–08 Mazda MX-5 features a state-of-the-art, fourth-generation Eaton MP62 rotating group housed in an integral inlet manifold. It was designed as a compact, flexible supercharger system for increased power with original equipment quietness and reliability without adversely affecting fuel economy.
www.cosworthusa.com
310-534-1390

Modp 0905 09 o products cosworth supercharger Photo 10/25   |   Forced Induction Buyer’s Guide

Cobb Tuning
Evo X Intake Kit
The COBB EVO X Intake is engineered to provide smooth airflow to the turbocharger, gaining up to 21 hp and 24 ft-lbs of torque at the wheels. The custom conical filter and composite venturi MAF adapter maintain critical air/fuel ratios. Simple to install, this makes a great first step in EVO X modification.
www.cobbtuning.com
801-713-0035

Modp 0905 10 o products evo x intake Photo 11/25   |   Forced Induction Buyer’s Guide

DC Sports
Competition Downpipes
DC Sports competition pipes delete the catalytic converter to eliminate restriction in the exhaust path and are dyno-tuned to deliver incredible performance gains for your factory turbocharged vehicle. They work with the factory turbocharger with no modifications and are available in 100 percent SUS304 polished stainless steel (including flanges).
www.dcsports.com
626-968-5147

Modp 0905 11 o products dc downpipes Photo 12/25   |   Forced Induction Buyer’s Guide

Garrett
EVO X Turbo Upgrade
The Garrett Turbocharger upgrade for the Mitsubishi Evolution X is a drop-in that takes power up to either 425 or 500 hp! Available with either a Garrett GT3071R or a GT3076R dual ball-bearing CHRA, the upgrade utilizes the stock downpipe, manifold, intake and even support brackets and heat shields for a stealth, OE look.
www.turbobygarrett.com

Modp 0905 12 o products garret turbo Photo 13/25   |   Forced Induction Buyer’s Guide

Samco Sport
Silicone Intercooler Hose Kit
Samco Sport makes high-quality silicone intercooler hose kits for EVO 8/9/10, WRX/STi, S13/S14, 300ZX, Skyline R32/33/34, GT-R R35, FC/FD RX-7, SRT-4, Supra and MR2. Superb integrity and superior performance reduce the risk of component failure and enable higher temperatures and pressures to be maintained with complete confidence.
www.optionsauto.com
800-678-2886

Modp_0905_13_o+products+samco_sport_tubes Photo 14/25   |   Forced Induction Buyer’s Guide

HKS
T62R Turbocharger
HKS turbocharger units are designed and built specifically to be performance oriented. Recently released by HKS as its 35th anniversary model, the HKS T62R features a polished compressor housing with a titanium center plate. Rated to 1,100 hp, the T62R is currently the largest turbine manufactured by HKS and has a full ball-bearing center cartridge.
www.hksusa.com
310-491-3300

Modp_0905_14_o+products+hks_turbo Photo 15/25   |   Forced Induction Buyer’s Guide

Greddy
Carb Legal S2000 Turbo Kits
GReddy has just released an updated version of its bolt-on turbo kit specifically for the newer 2.2-liter, drive-by-wire S2000. Just like the company’s ’00–05 S2000 kits, they are 50-state legal. These come with all the necessary basics; manifold, turbocharger, downpipe, intercooler, piping, injectors, plug-n-play ECU, air filter and heat-shields.
www.greddy.com
949-588-8300

Modp_0905_15_o+products+greddy_s2000_turbo Photo 16/25   |   Forced Induction Buyer’s Guide

Mishimoto
Universal Intercooler M Line
Mishimoto front-mount intercooler products are constructed of 6061 aluminum and precision TIG welded. Mishimoto’s universal intercooler products provide the ideal cooling capacity for any small and large turbo application, while safely increasing horsepower and giving that extra boost that every driver appreciates.
www.mishimoto.com
877-466-4744

Modp_0905_16_o+products+mishimoto_intercooler Photo 17/25   |   Forced Induction Buyer’s Guide

Stillen
350Z/G35 Supercharger
The foundation of this kit is the same twin-screw, positive-displacement supercharger used by OEMs around the world for its excellent peak and low-end power. The internal high-efficiency air-to-water intercooler greatly reduces inlet charge temperatures. These ship with all the necessary parts, including an electronic control box set for your vehicle.
www.stillen.com
888-221-2602

Modp_0905_17_o+products+stillen_supercharger Photo 18/25   |   Forced Induction Buyer’s Guide

Samco Sport
Silicone Intercooler Hose Kit
Samco Sport makes high-quality silicone intercooler hose kits for EVO 8/9/10, WRX/STi, S13/S14, 300ZX, Skyline R32/33/34, GT-R R35, FC/FD RX-7, SRT-4, Supra and MR2. Superb integrity and superior performance reduce the risk of component failure and enable higher temperatures and pressures to be maintained with complete confidence.
www.optionsauto.com
800-678-2886

Modp_0905_18_o+products+hks_exhaust_manifold Photo 19/25   |   Forced Induction Buyer’s Guide

ARC
Blow-Off Valve
The ARC blow-off valve uses only the finest in materials to pursue the most efficient and high performing release of boost pressure to keep the turbo spooled in all applications.
www.mackinindustries.com
562-946-6820

Modp 0905 19 o products arc bov Photo 20/25   |   Forced Induction Buyer’s Guide

Tomei
Subaru Arms M7760 Turbine Kit
The ARMS M7760 is the largest bolt-on turbo possible that the engineers can fit into the limited space of the EJ engine. The end result is a turbo that maintains the best characteristics of the EJ engine with the added benefit of an extended power band to the high-rpm region.
www.tomeiusa.com
949-855-6577

Modp_0905_20_o+products+tomei_turbine Photo 21/25   |   Forced Induction Buyer’s Guide

Turbonetics
RG-45 Wastegate
The all-new RG-45 wastegate is built with the latest technologies, including the stainless steel base, Inconel high-temp valve, high-temp fluro-silicone diaphragm, and V-band connection, all in a compact frame. This 45mm valve unit is suitable for powerplants making up to 750 hp.
www.turboneticsinc.com
805-581-0333

Modp_0905_21_o+products+turbonetics_wastegate Photo 22/25   |   Forced Induction Buyer’s Guide

MXP
EVO X Downpipe
The MXP EVO Downpipe is a result of research and development of the industry’s feedback when it comes to what is most desirable among exhaust performance products. MXP did not cut any corners, materials are all high grade and each item is dyno checked to ensure the best performance for the dollar spent.
www.mackinindustries.com
562-946-6820

Modp_0905_22_o+products+mxp_downpipe Photo 23/25   |   Forced Induction Buyer’s Guide

Tomei
Subaru manifold for single scroll turbo
Tomei’s unequal length headers are designed to increase spool and provide that original boxer sound, much like the OEM pipe. The use of SUS304 stainless steel enables the header to be lightweight and resistant to rust.
www.tomeiusa.com
949-855-6577

Modp_0905_23_o+products+tomei_turbo Photo 24/25   |   Forced Induction Buyer’s Guide

Turbonetics
GT-K Turbocharger
Aerodynamics is what separates the GT-K line from the competition. Turbonetics GT-K exclusive Map Enhancement Porting allows maximum efficiency across a broad rpm range and the patented Ceramic Angular-Contact Ball Bearing is utilized for extreme durability and performance. It’s capable of 300–1,000 hp and available water-cooled.
www.turboneticsinc.com
805-581-0333

Modp 0905 24 o products turbonetics Photo 25/25   |   Forced Induction Buyer’s Guide

Sources

Stillen
Costa Mesa, CA 92626
800-891-1058
http://www.stillen.com
ARC
Santa Fe Springs, CA 90670
562-946-6820
http://www.mackinindustries.com
Cobb Tuning
Austin, TX 78758
866-922-3059
http://www.cobbtuning.com
DC Sports
City of Industry, CA 91746
800-237-7560
http://www.dcsports.com
GReddy Performance Products
Irvine, CA 92618
949-588-8300
http://www.greddy.com
MXP
City of Industry, CA 90670
562-946-6820
http://www.mackinindustries.com
Verocious Motorsports
Wilmington, DE 19801
877-867-1320
http://www.verociousmotorsports.com
Tomei Powered USA, Inc.
Lake Forest, CA 92630
949-855-6577
http://www.tomeiusa.com
Mishimoto
Wilmington, DE 19803
877-466-4744
http://www.mishimoto.com
Cosworth
Torrance, CA 90505
310-534-1390
www.cosworth.com
Agency Power Industries
Gilbert, AZ 85233
480-921-7422
http://www.agency-power.com
Garrett Turbo
Denver, CO 80216
800-822-4332
http://www.turbobygarrett.com
HKS USA
Los Angeles, CA 90061
310-491-3300
http://www.hksusa.com
AMS Performance
West Chicago, IL 60185
847-709-0530
http://www.amsperformance.com
Turbonetics
Simi Valley, CA 93065
805-581-0333
http://www.turboneticsinc.com

BROWSE CARS BY MARKET

MORE HOW TO

In a world where high-power V8s dominate, this 2.7L Toyota proves a force to be reckoned with.
Evan PerkinsSep 11, 2018
Produced for over 13 years in practically every configuration imaginable, the SR20 family of engines powered 18 different Nissan/Infiniti platforms throughout the world
Richard FongAug 31, 2018
New suspension parts for your build
RodrezAug 28, 2018
Super Street's Engine Tuning and Monitoring buyer's guide
RodrezAug 24, 2018
An age-old debate exists between the camps of Nissan and Toyota fans, discussing the virtues and shortcomings of Nissan's RB26DETT and Toyota's 2JZ-GTE.
Richard FongAug 23, 2018
Sponsored Links

SEARCH ARTICLES BY MAKE/MODEL

Search
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS
TO TOP