Super Street Network

 |   |   |  Philips X-tremeVision Bulbs Released
Subscribe to the Free
Newsletter

Philips X-tremeVision Bulbs Released

The brightest bulb to come out of the brand's lineup

Oct 23, 2013
1310 Philips X TremeVision Photo 1/1   |  
Photo by Philips

Philips X-tremeVision Details:

  • 100% more light over the standard halogen bulbs
  • Street legal and DOT approved
  • Comes in many sizes
  • MSRP $49.99

When weak OEM bulbs aren't cutting it or it is time for replacement, consider Philips' latest offering: Philips X-tremeVision bulbs. Not only do Philips Automotive products enhance the style of your ride but it also improves driver safety. With that said, Philips is proud to announce its brightest and most powerful bulb in Philips Automotive's line of premium upgrade headlight bulbs the X-tremeVision headlamp bulbs.

The new bulbs will give off 100 percent more light over standard halogen bulbs, allowing maximum lighting performance and improved nighttime driving visibility. The X-tremeVision bulbs are fully street legal and DOT approved, while retaining the same OEM quality. Spot hazards sooner and avoid obstacles with the brighter bulbs. Each features a chromium tip, special anti-reflex coating, new gas composition and adapted pressure, and a quartz glass with a new optical finish.

General Manager of Philips Automotive Dennis Samfilippo says, "Our upgrade portfolio represents a refinement of the Philips 'go to market' strategy. After conducting extensive category management analysis and seeing the complex proliferation of bulbs on the market, we felt that our customers would benefit more by having simple choices based on their lighting needs."

Philips X-tremeVision bulbs come in various sizes. Configurations include 9003, 9004, 9005, 9006, 9007, 9008/H13, H7 and H11. MSRP is set at $49.99.

Visit the Philips website for more information at http://www.usa.philips.com/

Jofel Tolosa
646 Articles

BROWSE CARS BY MARKET

MORE HOW TO

On Day 5, the last day we have hands on the Week To Wicked Honda AP1 S2000, we instal Seibon carbon fiber, Konig wheels shod in Falken rubber, fit a Covercraft cover, and go to GReddy to dyno
RodrezMay 26, 2018
It's day 4 of the Week to Wicked build-up and with the turbo kit installed we're back under the car to pull out the old clutch.
RodrezMay 24, 2018
Finishing off the turbo kit while ENEOS steps in to top us off
RodrezMay 24, 2018
The decision to incorporate forced induction on our project car wasn't a difficult one. Rather than struggle to wring 5 or 10 horsepower from the native F20C with bolt-ons, we're reaching for turbo power
RodrezMay 22, 2018
Returned some spring to her step with a set of coilovers from AST Suspension and key bushing replacements from Energy Suspension.
Bob HernandezMay 22, 2018
Sponsored Links

SEARCH ARTICLES BY MAKE/MODEL

Search
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS
TO TOP