Super Street Network

 |   |   |  Project RX-8 - Exhaust Side Tuning - Tech
Subscribe to the Free
Newsletter

Project RX-8 - Exhaust Side Tuning - Tech

Racing Beat And Milltek Sport Help Our RX-8 Eexhale.

David Pratte
Dec 23, 2010

Up until now, we've focused our attention on improving the grip and handling of our '05 Mazda RX-8, as well as addressing a few of its known weaknesses, including the ignition and fuel system. But the time has finally come to make a little extra jam, and truth be told, the Renesis in stock form really is pretty underwhelming in the horsepower department. Don't misunderstand - we love the way this latest version of the 13b sounds and feels as it revs to 9000 rpm, but the lack of torque and midrange power has left us wanting more.

Modp_1101_02_o+project_rx 8+left_side_view Photo 2/10   |   Project RX-8 - Exhaust Side Tuning - Tech

To get some extra power, we've contemplated everything from a 20b swap to a V-8 swap, but since we want to keep the car eligible for Street Touring class Solo 2 competition, an exotic engine swap isn't an option. With STX class competition in mind, we've set about freeing up our Renesis' breathing on the exhaust side, where aftermarket headers, high-flow cats and after-cat exhaust systems are permitted.

We started with Racing Beat's exhaust header, a nicely constructed 304 stainless steel unit with individual 1.75-inch OD mandrel-bent tubular primaries that merge into a 3-1 collector. The mounting flange is cast stainless steel and has been carefully designed by the rotary gurus at Racing Beat to allow exhaust gases to smoothly transition from the engine to the primary tubes. They've also incorporated emissions control air passages in to the flange design so that the factory EGR system can continue to function properly. It's also equipped with an O2 sensor bung so that the primary O2 sensor can be plugged in - another requirement for retaining proper emissions system functionality.

Swapping in the Racing Beat header is a straightforward affair, one that SG-Motorsports' rotary expert, Joe, handled quickly for us. Since we suspected a clogged cat as the source of our high-rpm power loss, rather than testing the header on its own we decided to install the Racing Beat 3-inch OD resonated race pipe at the same time. This dual resonated midpipe replacement deletes the gigantic OEM catalytic converter, so it's not street legal, but it would be a good way to test our clogged cat theory.

Modp_1101_06_o+project_rx 8+hjs_motorsports Photo 3/10   |   The HJS Motorsports cat was positioned in the OE cat location for quick light up and STX rules compliance.

With the RB header and race pipe installed, we bolted the RX-8's rear hubs up to the U2Ndyno.com Dynapack and spun our Renesis up to redline several times. Power improved across the board and the problematic top 2500 rpm smoothed out and improved considerably, but still isn't peaking as high as it should (at least 10 whp higher than the second "hump" on the horsepower line is typical of a healthy Renesis). So, although the Racing Beat header and race pipe combo proved a potent horsepower liberator, it hasn't turned out to be the magic top-end tonic we were hoping for. The OEM cat would appear to have been contributing to the weak top end, but there's still something holding our Renesis back above 7000 rpm.

Now it was time to make our RX-8 STX class legal, if not street legal in some states (check your local regulations to determine if high-flow cats are permitted). As per the STX rules, we'd need to install a catalytic converter within 6 inches of the OEM location. But what cat to use? Having stumbled across a thread on RX8club.com, where a hardcore STU class autocrosser was using a HJS Motorsports cat normally used on WRC, WTCC and DTM race cars in Europe (where they have much stricter emissions laws for racing than we have), our interest was piqued. If this cat can survive the kind of anti-lag punishment and sky-high turbocharged exhaust gas temps produced by a WRC engine, it would no doubt easily withstand the heat produced by a mildly tuned Renesis engine.

Since there's no U.S. distributor for HJS Motorsports catalytic converters, we turned to Charlie Orpen at Milltek Sport Ltd in the UK. Milltek stocks HJS cats designed for modified road cars and full-blown race cars, and as we learned firsthand, Milltek ships quickly and affordably. Since we wanted the big dog WRC-spec motorsports cat, Charlie shipped us one with a 3-inch OD and 13.25-inch length, which just so happens to make it a perfect replacement for the forward-most resonator on the RB race pipe. This puts the HJS cat in the OEM location, meaning it'll light up quickly for proper emissions control and make use of the factory heat shield that protects the center tunnel from excessive heat buildup.

Modp_1101_07_o+project_rx 8+race_pipe Photo 4/10   |   Racing Beat's resonated race pipe deletes the OE cat, but keeps sound level very close to factory thanks to the two large resonators.

We were more than a little curious to see what sort of restriction this top-of-the-line motorsports catalyzer might be, but to our amazement power output actually increased slightly compared to the catless race pipe and sound was very close to OE since we've kept the stock muffler section for now. The small improvement in power output was likely the result of slightly lower engine temps during the dyno runs and/or a reset ECU, but it's still remarkable to see a cat that doesn't throw a CEL and robs no power whatsoever.

We were also surprised and impressed by how quiet the exhaust continues to be with the Racing Beat header, resonated midpipe and HJS-cat in place, cruising decibels and sound quality being virtually indistinguishable from the factory setup. There is, however, a new and pleasingly menacing snarl when stomping on the loud pedal, a noise that's distinctly Renesis and one that puts a grin on our faces every time we let it rip to redline.

Next month we're going to install a COBB AccessPORT so that we can datalog a wide variety of engine health parameters. With any luck this will help us get to the bottom of the flat top end, particularly since we're teaming up with Jeff from MazdaManiac.com who's going to provide us with his custom remote tuning service. With Jeff's help, we're confident we'll maximize engine output while either solving (or at least identifying) the source of the high-rpm woes.

By David Pratte
216 Articles

BROWSE CARS BY MARKET

MORE HOW TO

Giving a daily some much need modernization
Bob HernandezNov 15, 2018
In a world where cars steer, brake, and even park themselves, the Scion FR-S begs to be tossed at apexes with reckless abandon
Evan GriffeyNov 6, 2018
Who knew you could fix toe on a rear twist beam cars with such a simple kit?
Bob HernandezOct 30, 2018
These new snails aim to change the game, boasting the highest output from the smallest package.
Richard FongOct 12, 2018
Take a closer look at the 4Piston Racing head that will be used on project K24.
RodrezOct 4, 2018
Sponsored Links

SEARCH ARTICLES BY MAKE/MODEL

Search
CLOSE X
BUYER'S GUIDE
SEE THE ALL NEW
NEWS, REVIEWS & SPECS
TO TOP