10. Clean all brake components thoroughly with brake cleaner 11. Install new rotor on hub 12. Re-install retaining screws. 13. Re-install caliper assembly - Tighten caliper bridge bolts to the proper torque specs 14. Remove lower caliper bolt and lift caliper away from the rotor. EBC Red Stuff Ceramic Pads! 15. Remove your old pads, thoroughly clean caliper hardware and insert new pads 16. Lower the caliper back in place and tighten caliper bolts to proper torque specs... Rinse and repeat these steps for the next front rotor/pad.16. Lower the caliper back in place and tighten caliper bolts to proper torque specs... Ri Rear Rotors and Pads 1. Jack up the rear of the car. Wedge the front wheels for added safety 2. Loosen the lower caliper bolt - do not remove 3. Remove the retaining screws. - use your e-brake to hold the rotor in place 4. Unhook e-brake cable 5. Remove both e-brake bracket bolts 6. Remove upper and lower caliper bridge bolts 7. Remove caliper assembly « | 1 | 2 | 3 | » | View Full Article By Mazzy J Mazzante Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
