Super Street Magazine Homepage
Facebook Click here to find out more!

Honda Civic B16A Motor Swap - Heart Surgery

Project Old School EF, Part One: B16a Install

By , Photography by , The Project Car Archives
  • B16 Honda Swap Next An Odyssey Battery
    Next, an Odyssey PC680 battery was installed; then, all wiring and hoses were reconnected.
  • B16 Honda Swap Pop Off This Dust Ring
    Pop off this dust ring spacer off each hub and then proceed to install the longer HASport axles.
    B16 Honda Swap Pop Off This Dust Ring
    Pop off this dust ring spacer off each hub and then proceed to install the longer HASport
  • B16 Honda Swap Oem D16a Shift Linkage
    OEM D16A shift linkage (top) versus HASport shift linkage (bottom). The two are vastly different. Modifiying the D16 one to fit is not an option. Even the end brackets are different between the two transmissions.
    B16 Honda Swap Oem D16a Shift Linkage
    OEM D16A shift linkage (top) versus HASport shift linkage (bottom). The two are vastly dif
  • B16 Honda Swap Once The Linkage Is Bolted
    Once the linkage is bolted into plac, set the pin back in place using a punch pin tool.
  • B16 Honda Swap When Using The Factory B16a Intake
    When using the factory B16A intake manifold and throttle cable bracket, a throttle cable from a '92-'93 Integra GSR or a DOHC VTEC del Sol must be used.
    B16 Honda Swap When Using The Factory B16a Intake
    When using the factory B16A intake manifold and throttle cable bracket, a throttle cable f
  • B16 Honda Swap To Properly Utilize The 92
    To properly utilize the '92 spec B16A, we opted to use a OBD1 P30 ECU. To do so, we used a LoCash Racing OBD converter harness.
    B16 Honda Swap To Properly Utilize The 92
    To properly utilize the '92 spec B16A, we opted to use a OBD1 P30 ECU. To do so, we used a
  • B16 Honda Swap Re Attach The Header To The Exhaust
    Reattach the header to the exhaust. Then replenish all the fluids (coolant, oil, transmission fluid and clutch fluid). Start the engine to see if there is a check engine light. If so, check the codes by referring to your repair manual.
    B16 Honda Swap Re Attach The Header To The Exhaust
    Reattach the header to the exhaust. Then replenish all the fluids (coolant, oil, transmiss
  • B16 Honda Swap 140 Whp On A Dynojet
    149.3 whp and 104.2 ft-lb on SP Engineering's Dynojet. Not bad for a used, 15-year-old motor.
    B16 Honda Swap 140 Whp On A Dynojet
    149.3 whp and 104.2 ft-lb on SP Engineering's Dynojet. Not bad for a used, 15-year-old mot
CONNECT
1-800-Radiator
8-00/-723-4286
www.1800radiator.com
LOCASH RACING
ACT
206 East Ave., K-4
Lancaster
CA  93535
King Motorsports (Mugen)
Blox Racing
http://www.Bloxracing.com
Odyssey Batteries
ES Technical Roadsport Samco
Gear Speed SP Engineering
14829 Proctor Ave.
City of Industry
CA  91746
6-26/-333-5398
www.sp-power.com
Hasport Performance
http:// www.hasport.com
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!

*Please enter your username

*Please enter your password

*Please enter your comments
Comments:
Not Registered?Signup Here
(1024 character limit)
hustlerbd
nice one bro. i have a ed6, i will make my car exactly like this
Super Street Online