The longer wire harness is then fed through the door jamb and then attached to the frame. Instead of having the wiring running across the shock towers, they now will run underneath each fender.Instead of having the wiring running across the shock towers, they now will run underneath Passenger-side comparison. Driver-side comparison. An easy trick, every Honda owner knows: moving the ground from the front, to the rear of the valvecover.An easy trick, every Honda owner knows: moving the ground from the front, to the rear of t Injector wiring was taken out of the plastic housing, and rerouted underneath the fuel rail.Injector wiring was taken out of the plastic housing, and rerouted underneath the fuel rai Headlight wiring now creeps in from underneath for a stealth look. Chase McMaster leaves his seal of approval. Chase and Robbie of Chase Bays loving the wiring absence. CONNECT Chase Bays Gearheinz Power & Service Gallery Fresh « | 1 | 2 | 3 | 4 | View Full Article By Charles Trieu Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
